W8×18 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×18 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.14 in (206.8 mm) deep with a 5.25 in (133.4 mm) flange, a 0.23 in (5.8 mm) web and a 0.33 in (8.4 mm) flange, and weighs 18 lb/ft (26.8 kg/m). Area 5.26 in² (3,394 mm²); strong-axis Ix = 61.9 in⁴ (2,576.5 cm⁴), Sx = 15.2 in³ (249.1 cm³), Zx = 17 in³ (278.6 cm³).

dDepth
206.8 mm8.14 in8.14 in206.8 mm
bfFlange width
133.4 mm5.25 in5.25 in133.4 mm
twWeb thickness
5.8 mm0.23 in0.23 in5.8 mm
tfFlange thickness
8.4 mm0.33 in0.33 in8.4 mm

Drawing

133.4 mm5.25 in206.8 mm8.14 intf 8.4 mmtf 0.33 intw 5.8 mmtw 0.23 ink 16.0 mmk 0.63 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×18 specifications

dDepth8.14 in206.8 mm
bfFlange width5.25 in133.4 mm
twWeb thickness0.23 in5.8 mm
tfFlange thickness0.33 in8.4 mm
kDesign value0.63 in16.0 mm
kDetailing value13/16 in20.6 mm
k1Detailing value9/16 in14.3 mm
WWeight18 lb/ft26.8 kg/m
AArea5.26 in²3,394 mm²
IxMoment of inertia, strong axis61.9 in⁴2,576.5 cm⁴
ZxPlastic modulus, strong axis17 in³278.6 cm³
SxSection modulus, strong axis15.2 in³249.1 cm³
rxRadius of gyration, strong axis3.43 in87.1 mm
IyMoment of inertia, weak axis7.97 in⁴331.7 cm⁴
ZyPlastic modulus, weak axis4.66 in³76.4 cm³
SySection modulus, weak axis3.04 in³49.8 cm³
ryRadius of gyration, weak axis1.23 in31.2 mm
JTorsional constant0.172 in⁴7.16 cm⁴
bf/2tfFlange slenderness7.95
h/twWeb slenderness29.9
Metric designationW200×26.6

Also known as

W200×26.6

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.