W6×16 Beam Dimensions & Properties

W Shapes (AISC) · W6: 6 in nominal depth

W6×16 is an AISC wide-flange shape (W6: 6 in nominal depth). It is 6.28 in (159.5 mm) deep with a 4.03 in (102.4 mm) flange, a 0.26 in (6.6 mm) web and a 0.405 in (10.3 mm) flange, and weighs 16 lb/ft (23.8 kg/m). Area 4.74 in² (3,058 mm²); strong-axis Ix = 32.1 in⁴ (1,336.1 cm⁴), Sx = 10.2 in³ (167.1 cm³), Zx = 11.7 in³ (191.7 cm³).

dDepth
159.5 mm6.28 in6.28 in159.5 mm
bfFlange width
102.4 mm4.03 in4.03 in102.4 mm
twWeb thickness
6.6 mm0.26 in0.26 in6.6 mm
tfFlange thickness
10.3 mm0.405 in0.405 in10.3 mm

Drawing

102.4 mm4.03 in159.5 mm6.28 intf 10.3 mmtf 0.405 intw 6.6 mmtw 0.26 ink 16.6 mmk 0.655 in
Drawn to scale · Dimensions in mmDimensions in inches

W6×16 specifications

dDepth6.28 in159.5 mm
bfFlange width4.03 in102.4 mm
twWeb thickness0.26 in6.6 mm
tfFlange thickness0.405 in10.3 mm
kDesign value0.655 in16.6 mm
kDetailing value7/8 in22.2 mm
k1Detailing value9/16 in14.3 mm
WWeight16 lb/ft23.8 kg/m
AArea4.74 in²3,058 mm²
IxMoment of inertia, strong axis32.1 in⁴1,336.1 cm⁴
ZxPlastic modulus, strong axis11.7 in³191.7 cm³
SxSection modulus, strong axis10.2 in³167.1 cm³
rxRadius of gyration, strong axis2.6 in66.0 mm
IyMoment of inertia, weak axis4.43 in⁴184.4 cm⁴
ZyPlastic modulus, weak axis3.39 in³55.6 cm³
SySection modulus, weak axis2.2 in³36.1 cm³
ryRadius of gyration, weak axis0.97 in24.6 mm
JTorsional constant0.223 in⁴9.28 cm⁴
bf/2tfFlange slenderness4.98
h/twWeb slenderness19.1
Metric designationW150×24

Also known as

W150×24

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.