W8×15 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×15 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.11 in (206.0 mm) deep with a 4.02 in (102.1 mm) flange, a 0.245 in (6.2 mm) web and a 0.315 in (8.0 mm) flange, and weighs 15 lb/ft (22.3 kg/m). Area 4.44 in² (2,865 mm²); strong-axis Ix = 48 in⁴ (1,997.9 cm⁴), Sx = 11.8 in³ (193.4 cm³), Zx = 13.6 in³ (222.9 cm³).

dDepth
206.0 mm8.11 in8.11 in206.0 mm
bfFlange width
102.1 mm4.02 in4.02 in102.1 mm
twWeb thickness
6.2 mm0.245 in0.245 in6.2 mm
tfFlange thickness
8.0 mm0.315 in0.315 in8.0 mm

Drawing

102.1 mm4.02 in206.0 mm8.11 intf 8.0 mmtf 0.315 intw 6.2 mmtw 0.245 ink 15.6 mmk 0.615 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×15 specifications

dDepth8.11 in206.0 mm
bfFlange width4.02 in102.1 mm
twWeb thickness0.245 in6.2 mm
tfFlange thickness0.315 in8.0 mm
kDesign value0.615 in15.6 mm
kDetailing value13/16 in20.6 mm
k1Detailing value9/16 in14.3 mm
WWeight15 lb/ft22.3 kg/m
AArea4.44 in²2,865 mm²
IxMoment of inertia, strong axis48 in⁴1,997.9 cm⁴
ZxPlastic modulus, strong axis13.6 in³222.9 cm³
SxSection modulus, strong axis11.8 in³193.4 cm³
rxRadius of gyration, strong axis3.29 in83.6 mm
IyMoment of inertia, weak axis3.41 in⁴141.9 cm⁴
ZyPlastic modulus, weak axis2.67 in³43.8 cm³
SySection modulus, weak axis1.7 in³27.9 cm³
ryRadius of gyration, weak axis0.88 in22.3 mm
JTorsional constant0.137 in⁴5.7 cm⁴
bf/2tfFlange slenderness6.37
h/twWeb slenderness28.1
Metric designationW200×22.5

Also known as

W200×22.5

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.