W6×15 Beam Dimensions & Properties

W Shapes (AISC) · W6: 6 in nominal depth

W6×15 is an AISC wide-flange shape (W6: 6 in nominal depth). It is 5.99 in (152.1 mm) deep with a 5.99 in (152.1 mm) flange, a 0.23 in (5.8 mm) web and a 0.26 in (6.6 mm) flange, and weighs 15 lb/ft (22.3 kg/m). Area 4.43 in² (2,858 mm²); strong-axis Ix = 29.1 in⁴ (1,211.2 cm⁴), Sx = 9.72 in³ (159.3 cm³), Zx = 10.8 in³ (177 cm³).

dDepth
152.1 mm5.99 in5.99 in152.1 mm
bfFlange width
152.1 mm5.99 in5.99 in152.1 mm
twWeb thickness
5.8 mm0.23 in0.23 in5.8 mm
tfFlange thickness
6.6 mm0.26 in0.26 in6.6 mm

Drawing

152.1 mm5.99 in152.1 mm5.99 intf 6.6 mmtf 0.26 intw 5.8 mmtw 0.23 ink 13.0 mmk 0.51 in
Drawn to scale · Dimensions in mmDimensions in inches

W6×15 specifications

dDepth5.99 in152.1 mm
bfFlange width5.99 in152.1 mm
twWeb thickness0.23 in5.8 mm
tfFlange thickness0.26 in6.6 mm
kDesign value0.51 in13.0 mm
kDetailing value3/4 in19.0 mm
k1Detailing value9/16 in14.3 mm
WWeight15 lb/ft22.3 kg/m
AArea4.43 in²2,858 mm²
IxMoment of inertia, strong axis29.1 in⁴1,211.2 cm⁴
ZxPlastic modulus, strong axis10.8 in³177 cm³
SxSection modulus, strong axis9.72 in³159.3 cm³
rxRadius of gyration, strong axis2.56 in65.0 mm
IyMoment of inertia, weak axis9.32 in⁴387.9 cm⁴
ZyPlastic modulus, weak axis4.75 in³77.8 cm³
SySection modulus, weak axis3.11 in³51 cm³
ryRadius of gyration, weak axis1.45 in36.8 mm
JTorsional constant0.101 in⁴4.2 cm⁴
bf/2tfFlange slenderness11.5
h/twWeb slenderness21.6
Metric designationW150×22.5

Also known as

W150×22.5

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.