W12×19 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×19 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.2 in (309.9 mm) deep with a 4.01 in (101.9 mm) flange, a 0.235 in (6.0 mm) web and a 0.35 in (8.9 mm) flange, and weighs 19 lb/ft (28.3 kg/m). Area 5.57 in² (3,594 mm²); strong-axis Ix = 130 in⁴ (5,411 cm⁴), Sx = 21.3 in³ (349 cm³), Zx = 24.7 in³ (404.8 cm³).
- dDepth
- 309.9 mm12.2 in12.2 in309.9 mm
- bfFlange width
- 101.9 mm4.01 in4.01 in101.9 mm
- twWeb thickness
- 6.0 mm0.235 in0.235 in6.0 mm
- tfFlange thickness
- 8.9 mm0.35 in0.35 in8.9 mm
Drawing
W12×19 specifications
| dDepth | 12.2 in309.9 mm |
|---|---|
| bfFlange width | 4.01 in101.9 mm |
| twWeb thickness | 0.235 in6.0 mm |
| tfFlange thickness | 0.35 in8.9 mm |
| kDesign value | 0.65 in16.5 mm |
| kDetailing value | 7/8 in22.2 mm |
| k1Detailing value | 9/16 in14.3 mm |
| WWeight | 19 lb/ft28.3 kg/m |
| AArea | 5.57 in²3,594 mm² |
| IxMoment of inertia, strong axis | 130 in⁴5,411 cm⁴ |
| ZxPlastic modulus, strong axis | 24.7 in³404.8 cm³ |
| SxSection modulus, strong axis | 21.3 in³349 cm³ |
| rxRadius of gyration, strong axis | 4.82 in122.4 mm |
| IyMoment of inertia, weak axis | 3.76 in⁴156.5 cm⁴ |
| ZyPlastic modulus, weak axis | 2.98 in³48.8 cm³ |
| SySection modulus, weak axis | 1.88 in³30.8 cm³ |
| ryRadius of gyration, weak axis | 0.82 in20.9 mm |
| JTorsional constant | 0.18 in⁴7.49 cm⁴ |
| bf/2tfFlange slenderness | 5.72 |
| h/twWeb slenderness | 46.2 |
| Metric designation | W310×28.3 |
Also known as
W310×28.3
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.