W12×26 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×26 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.2 in (309.9 mm) deep with a 6.49 in (164.8 mm) flange, a 0.23 in (5.8 mm) web and a 0.38 in (9.7 mm) flange, and weighs 26 lb/ft (38.7 kg/m). Area 7.65 in² (4,935 mm²); strong-axis Ix = 204 in⁴ (8,491.1 cm⁴), Sx = 33.4 in³ (547.3 cm³), Zx = 37.2 in³ (609.6 cm³).
- dDepth
- 309.9 mm12.2 in12.2 in309.9 mm
- bfFlange width
- 164.8 mm6.49 in6.49 in164.8 mm
- twWeb thickness
- 5.8 mm0.23 in0.23 in5.8 mm
- tfFlange thickness
- 9.7 mm0.38 in0.38 in9.7 mm
Drawing
W12×26 specifications
| dDepth | 12.2 in309.9 mm |
|---|---|
| bfFlange width | 6.49 in164.8 mm |
| twWeb thickness | 0.23 in5.8 mm |
| tfFlange thickness | 0.38 in9.7 mm |
| kDesign value | 0.68 in17.3 mm |
| kDetailing value | 1 1/16 in27.0 mm |
| k1Detailing value | 3/4 in19.0 mm |
| WWeight | 26 lb/ft38.7 kg/m |
| AArea | 7.65 in²4,935 mm² |
| IxMoment of inertia, strong axis | 204 in⁴8,491.1 cm⁴ |
| ZxPlastic modulus, strong axis | 37.2 in³609.6 cm³ |
| SxSection modulus, strong axis | 33.4 in³547.3 cm³ |
| rxRadius of gyration, strong axis | 5.17 in131.3 mm |
| IyMoment of inertia, weak axis | 17.3 in⁴720.1 cm⁴ |
| ZyPlastic modulus, weak axis | 8.17 in³133.9 cm³ |
| SySection modulus, weak axis | 5.34 in³87.5 cm³ |
| ryRadius of gyration, weak axis | 1.51 in38.4 mm |
| JTorsional constant | 0.3 in⁴12.49 cm⁴ |
| bf/2tfFlange slenderness | 8.54 |
| h/twWeb slenderness | 47.2 |
| Metric designation | W310×38.7 |
Also known as
W310×38.7
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.