W12×65 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×65 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.1 in (307.3 mm) deep with a 12 in (304.8 mm) flange, a 0.39 in (9.9 mm) web and a 0.605 in (15.4 mm) flange, and weighs 65 lb/ft (96.7 kg/m). Area 19.1 in² (12,323 mm²); strong-axis Ix = 533 in⁴ (22,185.1 cm⁴), Sx = 87.9 in³ (1,440.4 cm³), Zx = 96.8 in³ (1,586.3 cm³).
- dDepth
- 307.3 mm12.1 in12.1 in307.3 mm
- bfFlange width
- 304.8 mm12 in12 in304.8 mm
- twWeb thickness
- 9.9 mm0.39 in0.39 in9.9 mm
- tfFlange thickness
- 15.4 mm0.605 in0.605 in15.4 mm
Drawing
W12×65 specifications
| dDepth | 12.1 in307.3 mm |
|---|---|
| bfFlange width | 12 in304.8 mm |
| twWeb thickness | 0.39 in9.9 mm |
| tfFlange thickness | 0.605 in15.4 mm |
| kDesign value | 1.2 in30.5 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 1 in25.4 mm |
| WWeight | 65 lb/ft96.7 kg/m |
| AArea | 19.1 in²12,323 mm² |
| IxMoment of inertia, strong axis | 533 in⁴22,185.1 cm⁴ |
| ZxPlastic modulus, strong axis | 96.8 in³1,586.3 cm³ |
| SxSection modulus, strong axis | 87.9 in³1,440.4 cm³ |
| rxRadius of gyration, strong axis | 5.28 in134.1 mm |
| IyMoment of inertia, weak axis | 174 in⁴7,242.4 cm⁴ |
| ZyPlastic modulus, weak axis | 44.1 in³722.7 cm³ |
| SySection modulus, weak axis | 29.1 in³476.9 cm³ |
| ryRadius of gyration, weak axis | 3.02 in76.7 mm |
| JTorsional constant | 2.18 in⁴90.74 cm⁴ |
| bf/2tfFlange slenderness | 9.92 |
| h/twWeb slenderness | 24.9 |
| Metric designation | W310×97 |
Also known as
W310×97
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.