W8×67 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×67 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 9 in (228.6 mm) deep with a 8.28 in (210.3 mm) flange, a 0.57 in (14.5 mm) web and a 0.935 in (23.7 mm) flange, and weighs 67 lb/ft (99.7 kg/m). Area 19.7 in² (12,710 mm²); strong-axis Ix = 272 in⁴ (11,321.5 cm⁴), Sx = 60.4 in³ (989.8 cm³), Zx = 70.1 in³ (1,148.7 cm³).

dDepth
228.6 mm9 in9 in228.6 mm
bfFlange width
210.3 mm8.28 in8.28 in210.3 mm
twWeb thickness
14.5 mm0.57 in0.57 in14.5 mm
tfFlange thickness
23.7 mm0.935 in0.935 in23.7 mm

Drawing

210.3 mm8.28 in228.6 mm9 intf 23.7 mmtf 0.935 intw 14.5 mmtw 0.57 ink 33.8 mmk 1.33 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×67 specifications

dDepth9 in228.6 mm
bfFlange width8.28 in210.3 mm
twWeb thickness0.57 in14.5 mm
tfFlange thickness0.935 in23.7 mm
kDesign value1.33 in33.8 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value15/16 in23.8 mm
WWeight67 lb/ft99.7 kg/m
AArea19.7 in²12,710 mm²
IxMoment of inertia, strong axis272 in⁴11,321.5 cm⁴
ZxPlastic modulus, strong axis70.1 in³1,148.7 cm³
SxSection modulus, strong axis60.4 in³989.8 cm³
rxRadius of gyration, strong axis3.72 in94.5 mm
IyMoment of inertia, weak axis88.6 in⁴3,687.8 cm⁴
ZyPlastic modulus, weak axis32.7 in³535.9 cm³
SySection modulus, weak axis21.4 in³350.7 cm³
ryRadius of gyration, weak axis2.12 in53.8 mm
JTorsional constant5.05 in⁴210.2 cm⁴
bf/2tfFlange slenderness4.43
h/twWeb slenderness11.1
Metric designationW200×100

Also known as

W200×100

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.