W12×58 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×58 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.2 in (309.9 mm) deep with a 10 in (254.0 mm) flange, a 0.36 in (9.1 mm) web and a 0.64 in (16.3 mm) flange, and weighs 58 lb/ft (86.3 kg/m). Area 17 in² (10,968 mm²); strong-axis Ix = 475 in⁴ (19,771 cm⁴), Sx = 78 in³ (1,278.2 cm³), Zx = 86.4 in³ (1,415.8 cm³).
- dDepth
- 309.9 mm12.2 in12.2 in309.9 mm
- bfFlange width
- 254.0 mm10 in10 in254.0 mm
- twWeb thickness
- 9.1 mm0.36 in0.36 in9.1 mm
- tfFlange thickness
- 16.3 mm0.64 in0.64 in16.3 mm
Drawing
W12×58 specifications
| dDepth | 12.2 in309.9 mm |
|---|---|
| bfFlange width | 10 in254.0 mm |
| twWeb thickness | 0.36 in9.1 mm |
| tfFlange thickness | 0.64 in16.3 mm |
| kDesign value | 1.24 in31.5 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 15/16 in23.8 mm |
| WWeight | 58 lb/ft86.3 kg/m |
| AArea | 17 in²10,968 mm² |
| IxMoment of inertia, strong axis | 475 in⁴19,771 cm⁴ |
| ZxPlastic modulus, strong axis | 86.4 in³1,415.8 cm³ |
| SxSection modulus, strong axis | 78 in³1,278.2 cm³ |
| rxRadius of gyration, strong axis | 5.28 in134.1 mm |
| IyMoment of inertia, weak axis | 107 in⁴4,453.7 cm⁴ |
| ZyPlastic modulus, weak axis | 32.5 in³532.6 cm³ |
| SySection modulus, weak axis | 21.4 in³350.7 cm³ |
| ryRadius of gyration, weak axis | 2.51 in63.8 mm |
| JTorsional constant | 2.1 in⁴87.41 cm⁴ |
| bf/2tfFlange slenderness | 7.82 |
| h/twWeb slenderness | 27 |
| Metric designation | W310×86 |
Also known as
W310×86
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.