W16×67 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×67 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.3 in (414.0 mm) deep with a 10.2 in (259.1 mm) flange, a 0.395 in (10.0 mm) web and a 0.665 in (16.9 mm) flange, and weighs 67 lb/ft (99.7 kg/m). Area 19.6 in² (12,645 mm²); strong-axis Ix = 954 in⁴ (39,708.5 cm⁴), Sx = 117 in³ (1,917.3 cm³), Zx = 130 in³ (2,130.3 cm³).

dDepth
414.0 mm16.3 in16.3 in414.0 mm
bfFlange width
259.1 mm10.2 in10.2 in259.1 mm
twWeb thickness
10.0 mm0.395 in0.395 in10.0 mm
tfFlange thickness
16.9 mm0.665 in0.665 in16.9 mm

Drawing

259.1 mm10.2 in414.0 mm16.3 intf 16.9 mmtf 0.665 intw 10.0 mmtw 0.395 ink 27.2 mmk 1.07 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×67 specifications

dDepth16.3 in414.0 mm
bfFlange width10.2 in259.1 mm
twWeb thickness0.395 in10.0 mm
tfFlange thickness0.665 in16.9 mm
kDesign value1.07 in27.2 mm
kDetailing value1 9/16 in39.7 mm
k1Detailing value1 in25.4 mm
WWeight67 lb/ft99.7 kg/m
AArea19.6 in²12,645 mm²
IxMoment of inertia, strong axis954 in⁴39,708.5 cm⁴
ZxPlastic modulus, strong axis130 in³2,130.3 cm³
SxSection modulus, strong axis117 in³1,917.3 cm³
rxRadius of gyration, strong axis6.96 in176.8 mm
IyMoment of inertia, weak axis119 in⁴4,953.2 cm⁴
ZyPlastic modulus, weak axis35.5 in³581.7 cm³
SySection modulus, weak axis23.2 in³380.2 cm³
ryRadius of gyration, weak axis2.46 in62.5 mm
JTorsional constant2.39 in⁴99.48 cm⁴
bf/2tfFlange slenderness7.7
h/twWeb slenderness35.9
Metric designationW410×100

Also known as

W410×100

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.