W14×74 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×74 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.2 in (360.7 mm) deep with a 10.1 in (256.5 mm) flange, a 0.45 in (11.4 mm) web and a 0.785 in (19.9 mm) flange, and weighs 74 lb/ft (110.1 kg/m). Area 21.8 in² (14,064 mm²); strong-axis Ix = 795 in⁴ (33,090.4 cm⁴), Sx = 112 in³ (1,835.4 cm³), Zx = 126 in³ (2,064.8 cm³).

dDepth
360.7 mm14.2 in14.2 in360.7 mm
bfFlange width
256.5 mm10.1 in10.1 in256.5 mm
twWeb thickness
11.4 mm0.45 in0.45 in11.4 mm
tfFlange thickness
19.9 mm0.785 in0.785 in19.9 mm

Drawing

256.5 mm10.1 in360.7 mm14.2 intf 19.9 mmtf 0.785 intw 11.4 mmtw 0.45 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×74 specifications

dDepth14.2 in360.7 mm
bfFlange width10.1 in256.5 mm
twWeb thickness0.45 in11.4 mm
tfFlange thickness0.785 in19.9 mm
kDesign value1.38 in35.1 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value1 1/16 in27.0 mm
WWeight74 lb/ft110.1 kg/m
AArea21.8 in²14,064 mm²
IxMoment of inertia, strong axis795 in⁴33,090.4 cm⁴
ZxPlastic modulus, strong axis126 in³2,064.8 cm³
SxSection modulus, strong axis112 in³1,835.4 cm³
rxRadius of gyration, strong axis6.04 in153.4 mm
IyMoment of inertia, weak axis134 in⁴5,577.5 cm⁴
ZyPlastic modulus, weak axis40.5 in³663.7 cm³
SySection modulus, weak axis26.6 in³435.9 cm³
ryRadius of gyration, weak axis2.48 in63.0 mm
JTorsional constant3.87 in⁴161.08 cm⁴
bf/2tfFlange slenderness6.41
h/twWeb slenderness25.4
Metric designationW360×110

Also known as

W360×110

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.