W12×79 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×79 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.4 in (315.0 mm) deep with a 12.1 in (307.3 mm) flange, a 0.47 in (11.9 mm) web and a 0.735 in (18.7 mm) flange, and weighs 79 lb/ft (117.6 kg/m). Area 23.2 in² (14,968 mm²); strong-axis Ix = 662 in⁴ (27,554.5 cm⁴), Sx = 107 in³ (1,753.4 cm³), Zx = 119 in³ (1,950.1 cm³).

dDepth
315.0 mm12.4 in12.4 in315.0 mm
bfFlange width
307.3 mm12.1 in12.1 in307.3 mm
twWeb thickness
11.9 mm0.47 in0.47 in11.9 mm
tfFlange thickness
18.7 mm0.735 in0.735 in18.7 mm

Drawing

307.3 mm12.1 in315.0 mm12.4 intf 18.7 mmtf 0.735 intw 11.9 mmtw 0.47 ink 33.8 mmk 1.33 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×79 specifications

dDepth12.4 in315.0 mm
bfFlange width12.1 in307.3 mm
twWeb thickness0.47 in11.9 mm
tfFlange thickness0.735 in18.7 mm
kDesign value1.33 in33.8 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value1 1/16 in27.0 mm
WWeight79 lb/ft117.6 kg/m
AArea23.2 in²14,968 mm²
IxMoment of inertia, strong axis662 in⁴27,554.5 cm⁴
ZxPlastic modulus, strong axis119 in³1,950.1 cm³
SxSection modulus, strong axis107 in³1,753.4 cm³
rxRadius of gyration, strong axis5.34 in135.6 mm
IyMoment of inertia, weak axis216 in⁴8,990.6 cm⁴
ZyPlastic modulus, weak axis54.3 in³889.8 cm³
SySection modulus, weak axis35.8 in³586.7 cm³
ryRadius of gyration, weak axis3.05 in77.5 mm
JTorsional constant3.84 in⁴159.83 cm⁴
bf/2tfFlange slenderness8.22
h/twWeb slenderness20.7
Metric designationW310×117

Also known as

W310×117

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.