W8×48 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×48 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.5 in (215.9 mm) deep with a 8.11 in (206.0 mm) flange, a 0.4 in (10.2 mm) web and a 0.685 in (17.4 mm) flange, and weighs 48 lb/ft (71.4 kg/m). Area 14.1 in² (9,097 mm²); strong-axis Ix = 184 in⁴ (7,658.7 cm⁴), Sx = 43.2 in³ (707.9 cm³), Zx = 49 in³ (803 cm³).

dDepth
215.9 mm8.5 in8.5 in215.9 mm
bfFlange width
206.0 mm8.11 in8.11 in206.0 mm
twWeb thickness
10.2 mm0.4 in0.4 in10.2 mm
tfFlange thickness
17.4 mm0.685 in0.685 in17.4 mm

Drawing

206.0 mm8.11 in215.9 mm8.5 intf 17.4 mmtf 0.685 intw 10.2 mmtw 0.4 ink 27.4 mmk 1.08 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×48 specifications

dDepth8.5 in215.9 mm
bfFlange width8.11 in206.0 mm
twWeb thickness0.4 in10.2 mm
tfFlange thickness0.685 in17.4 mm
kDesign value1.08 in27.4 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value13/16 in20.6 mm
WWeight48 lb/ft71.4 kg/m
AArea14.1 in²9,097 mm²
IxMoment of inertia, strong axis184 in⁴7,658.7 cm⁴
ZxPlastic modulus, strong axis49 in³803 cm³
SxSection modulus, strong axis43.2 in³707.9 cm³
rxRadius of gyration, strong axis3.61 in91.7 mm
IyMoment of inertia, weak axis60.9 in⁴2,534.8 cm⁴
ZyPlastic modulus, weak axis22.9 in³375.3 cm³
SySection modulus, weak axis15 in³245.8 cm³
ryRadius of gyration, weak axis2.08 in52.8 mm
JTorsional constant1.96 in⁴81.58 cm⁴
bf/2tfFlange slenderness5.92
h/twWeb slenderness15.9
Metric designationW200×71

Also known as

W200×71

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.