W21×48 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×48 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 20.6 in (523.2 mm) deep with a 8.14 in (206.8 mm) flange, a 0.35 in (8.9 mm) web and a 0.43 in (10.9 mm) flange, and weighs 48 lb/ft (71.4 kg/m). Area 14.1 in² (9,097 mm²); strong-axis Ix = 959 in⁴ (39,916.6 cm⁴), Sx = 93 in³ (1,524 cm³), Zx = 107 in³ (1,753.4 cm³).

dDepth
523.2 mm20.6 in20.6 in523.2 mm
bfFlange width
206.8 mm8.14 in8.14 in206.8 mm
twWeb thickness
8.9 mm0.35 in0.35 in8.9 mm
tfFlange thickness
10.9 mm0.43 in0.43 in10.9 mm

Drawing

206.8 mm8.14 in523.2 mm20.6 intf 10.9 mmtf 0.43 intw 8.9 mmtw 0.35 ink 23.6 mmk 0.93 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×48 specifications

dDepth20.6 in523.2 mm
bfFlange width8.14 in206.8 mm
twWeb thickness0.35 in8.9 mm
tfFlange thickness0.43 in10.9 mm
kDesign value0.93 in23.6 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value13/16 in20.6 mm
WWeight48 lb/ft71.4 kg/m
AArea14.1 in²9,097 mm²
IxMoment of inertia, strong axis959 in⁴39,916.6 cm⁴
ZxPlastic modulus, strong axis107 in³1,753.4 cm³
SxSection modulus, strong axis93 in³1,524 cm³
rxRadius of gyration, strong axis8.24 in209.3 mm
IyMoment of inertia, weak axis38.7 in⁴1,610.8 cm⁴
ZyPlastic modulus, weak axis14.9 in³244.2 cm³
SySection modulus, weak axis9.52 in³156 cm³
ryRadius of gyration, weak axis1.66 in42.2 mm
JTorsional constant0.803 in⁴33.42 cm⁴
bf/2tfFlange slenderness9.47
h/twWeb slenderness53.6
Metric designationW530×72

Also known as

W530×72

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.