W10×49 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×49 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10 in (254.0 mm) deep with a 10 in (254.0 mm) flange, a 0.34 in (8.6 mm) web and a 0.56 in (14.2 mm) flange, and weighs 49 lb/ft (72.9 kg/m). Area 14.4 in² (9,290 mm²); strong-axis Ix = 272 in⁴ (11,321.5 cm⁴), Sx = 54.6 in³ (894.7 cm³), Zx = 60.4 in³ (989.8 cm³).
- dDepth
- 254.0 mm10 in10 in254.0 mm
- bfFlange width
- 254.0 mm10 in10 in254.0 mm
- twWeb thickness
- 8.6 mm0.34 in0.34 in8.6 mm
- tfFlange thickness
- 14.2 mm0.56 in0.56 in14.2 mm
Drawing
W10×49 specifications
| dDepth | 10 in254.0 mm |
|---|---|
| bfFlange width | 10 in254.0 mm |
| twWeb thickness | 0.34 in8.6 mm |
| tfFlange thickness | 0.56 in14.2 mm |
| kDesign value | 1.06 in26.9 mm |
| kDetailing value | 1 1/4 in31.8 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 49 lb/ft72.9 kg/m |
| AArea | 14.4 in²9,290 mm² |
| IxMoment of inertia, strong axis | 272 in⁴11,321.5 cm⁴ |
| ZxPlastic modulus, strong axis | 60.4 in³989.8 cm³ |
| SxSection modulus, strong axis | 54.6 in³894.7 cm³ |
| rxRadius of gyration, strong axis | 4.35 in110.5 mm |
| IyMoment of inertia, weak axis | 93.4 in⁴3,887.6 cm⁴ |
| ZyPlastic modulus, weak axis | 28.3 in³463.8 cm³ |
| SySection modulus, weak axis | 18.7 in³306.4 cm³ |
| ryRadius of gyration, weak axis | 2.54 in64.5 mm |
| JTorsional constant | 1.39 in⁴57.86 cm⁴ |
| bf/2tfFlange slenderness | 8.93 |
| h/twWeb slenderness | 23.1 |
| Metric designation | W250×73 |
Also known as
W250×73
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.