W14×53 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×53 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.9 in (353.1 mm) deep with a 8.06 in (204.7 mm) flange, a 0.37 in (9.4 mm) web and a 0.66 in (16.8 mm) flange, and weighs 53 lb/ft (78.9 kg/m). Area 15.6 in² (10,064 mm²); strong-axis Ix = 541 in⁴ (22,518.1 cm⁴), Sx = 77.8 in³ (1,274.9 cm³), Zx = 87.1 in³ (1,427.3 cm³).
- dDepth
- 353.1 mm13.9 in13.9 in353.1 mm
- bfFlange width
- 204.7 mm8.06 in8.06 in204.7 mm
- twWeb thickness
- 9.4 mm0.37 in0.37 in9.4 mm
- tfFlange thickness
- 16.8 mm0.66 in0.66 in16.8 mm
Drawing
W14×53 specifications
| dDepth | 13.9 in353.1 mm |
|---|---|
| bfFlange width | 8.06 in204.7 mm |
| twWeb thickness | 0.37 in9.4 mm |
| tfFlange thickness | 0.66 in16.8 mm |
| kDesign value | 1.25 in31.8 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 1 in25.4 mm |
| WWeight | 53 lb/ft78.9 kg/m |
| AArea | 15.6 in²10,064 mm² |
| IxMoment of inertia, strong axis | 541 in⁴22,518.1 cm⁴ |
| ZxPlastic modulus, strong axis | 87.1 in³1,427.3 cm³ |
| SxSection modulus, strong axis | 77.8 in³1,274.9 cm³ |
| rxRadius of gyration, strong axis | 5.89 in149.6 mm |
| IyMoment of inertia, weak axis | 57.7 in⁴2,401.7 cm⁴ |
| ZyPlastic modulus, weak axis | 22 in³360.5 cm³ |
| SySection modulus, weak axis | 14.3 in³234.3 cm³ |
| ryRadius of gyration, weak axis | 1.92 in48.8 mm |
| JTorsional constant | 1.94 in⁴80.75 cm⁴ |
| bf/2tfFlange slenderness | 6.11 |
| h/twWeb slenderness | 30.9 |
| Metric designation | W360×79 |
Also known as
W360×79
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.