W16×26 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×26 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 15.7 in (398.8 mm) deep with a 5.5 in (139.7 mm) flange, a 0.25 in (6.4 mm) web and a 0.345 in (8.8 mm) flange, and weighs 26 lb/ft (38.7 kg/m). Area 7.68 in² (4,955 mm²); strong-axis Ix = 301 in⁴ (12,528.6 cm⁴), Sx = 38.4 in³ (629.3 cm³), Zx = 44.2 in³ (724.3 cm³).

dDepth
398.8 mm15.7 in15.7 in398.8 mm
bfFlange width
139.7 mm5.5 in5.5 in139.7 mm
twWeb thickness
6.4 mm0.25 in0.25 in6.4 mm
tfFlange thickness
8.8 mm0.345 in0.345 in8.8 mm

Drawing

139.7 mm5.5 in398.8 mm15.7 intf 8.8 mmtf 0.345 intw 6.4 mmtw 0.25 ink 19.0 mmk 0.747 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×26 specifications

dDepth15.7 in398.8 mm
bfFlange width5.5 in139.7 mm
twWeb thickness0.25 in6.4 mm
tfFlange thickness0.345 in8.8 mm
kDesign value0.747 in19.0 mm
kDetailing value1 1/16 in27.0 mm
k1Detailing value3/4 in19.0 mm
WWeight26 lb/ft38.7 kg/m
AArea7.68 in²4,955 mm²
IxMoment of inertia, strong axis301 in⁴12,528.6 cm⁴
ZxPlastic modulus, strong axis44.2 in³724.3 cm³
SxSection modulus, strong axis38.4 in³629.3 cm³
rxRadius of gyration, strong axis6.26 in159.0 mm
IyMoment of inertia, weak axis9.59 in⁴399.2 cm⁴
ZyPlastic modulus, weak axis5.48 in³89.8 cm³
SySection modulus, weak axis3.49 in³57.2 cm³
ryRadius of gyration, weak axis1.12 in28.4 mm
JTorsional constant0.262 in⁴10.91 cm⁴
bf/2tfFlange slenderness7.97
h/twWeb slenderness56.8
Metric designationW410×38.8

Also known as

W410×38.8

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.