W16×31 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×31 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 15.9 in (403.9 mm) deep with a 5.53 in (140.5 mm) flange, a 0.275 in (7.0 mm) web and a 0.44 in (11.2 mm) flange, and weighs 31 lb/ft (46.1 kg/m). Area 9.13 in² (5,890 mm²); strong-axis Ix = 375 in⁴ (15,608.7 cm⁴), Sx = 47.2 in³ (773.5 cm³), Zx = 54 in³ (884.9 cm³).

dDepth
403.9 mm15.9 in15.9 in403.9 mm
bfFlange width
140.5 mm5.53 in5.53 in140.5 mm
twWeb thickness
7.0 mm0.275 in0.275 in7.0 mm
tfFlange thickness
11.2 mm0.44 in0.44 in11.2 mm

Drawing

140.5 mm5.53 in403.9 mm15.9 intf 11.2 mmtf 0.44 intw 7.0 mmtw 0.275 ink 21.4 mmk 0.842 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×31 specifications

dDepth15.9 in403.9 mm
bfFlange width5.53 in140.5 mm
twWeb thickness0.275 in7.0 mm
tfFlange thickness0.44 in11.2 mm
kDesign value0.842 in21.4 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight31 lb/ft46.1 kg/m
AArea9.13 in²5,890 mm²
IxMoment of inertia, strong axis375 in⁴15,608.7 cm⁴
ZxPlastic modulus, strong axis54 in³884.9 cm³
SxSection modulus, strong axis47.2 in³773.5 cm³
rxRadius of gyration, strong axis6.41 in162.8 mm
IyMoment of inertia, weak axis12.4 in⁴516.1 cm⁴
ZyPlastic modulus, weak axis7.03 in³115.2 cm³
SySection modulus, weak axis4.49 in³73.6 cm³
ryRadius of gyration, weak axis1.17 in29.7 mm
JTorsional constant0.461 in⁴19.19 cm⁴
bf/2tfFlange slenderness6.28
h/twWeb slenderness51.6
Metric designationW410×46.1

Also known as

W410×46.1

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.