W16×36 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×36 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 15.9 in (403.9 mm) deep with a 6.99 in (177.5 mm) flange, a 0.295 in (7.5 mm) web and a 0.43 in (10.9 mm) flange, and weighs 36 lb/ft (53.6 kg/m). Area 10.6 in² (6,839 mm²); strong-axis Ix = 448 in⁴ (18,647.2 cm⁴), Sx = 56.5 in³ (925.9 cm³), Zx = 64 in³ (1,048.8 cm³).

dDepth
403.9 mm15.9 in15.9 in403.9 mm
bfFlange width
177.5 mm6.99 in6.99 in177.5 mm
twWeb thickness
7.5 mm0.295 in0.295 in7.5 mm
tfFlange thickness
10.9 mm0.43 in0.43 in10.9 mm

Drawing

177.5 mm6.99 in403.9 mm15.9 intf 10.9 mmtf 0.43 intw 7.5 mmtw 0.295 ink 21.1 mmk 0.832 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×36 specifications

dDepth15.9 in403.9 mm
bfFlange width6.99 in177.5 mm
twWeb thickness0.295 in7.5 mm
tfFlange thickness0.43 in10.9 mm
kDesign value0.832 in21.1 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight36 lb/ft53.6 kg/m
AArea10.6 in²6,839 mm²
IxMoment of inertia, strong axis448 in⁴18,647.2 cm⁴
ZxPlastic modulus, strong axis64 in³1,048.8 cm³
SxSection modulus, strong axis56.5 in³925.9 cm³
rxRadius of gyration, strong axis6.51 in165.4 mm
IyMoment of inertia, weak axis24.5 in⁴1,019.8 cm⁴
ZyPlastic modulus, weak axis10.8 in³177 cm³
SySection modulus, weak axis7 in³114.7 cm³
ryRadius of gyration, weak axis1.52 in38.6 mm
JTorsional constant0.545 in⁴22.68 cm⁴
bf/2tfFlange slenderness8.12
h/twWeb slenderness48.1
Metric designationW410×53

Also known as

W410×53

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.