W16×40 Beam Dimensions & Properties
W Shapes (AISC) · W16: 16 in nominal depth
W16×40 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16 in (406.4 mm) deep with a 7 in (177.8 mm) flange, a 0.305 in (7.7 mm) web and a 0.505 in (12.8 mm) flange, and weighs 40 lb/ft (59.5 kg/m). Area 11.8 in² (7,613 mm²); strong-axis Ix = 518 in⁴ (21,560.8 cm⁴), Sx = 64.7 in³ (1,060.2 cm³), Zx = 73 in³ (1,196.3 cm³).
- dDepth
- 406.4 mm16 in16 in406.4 mm
- bfFlange width
- 177.8 mm7 in7 in177.8 mm
- twWeb thickness
- 7.7 mm0.305 in0.305 in7.7 mm
- tfFlange thickness
- 12.8 mm0.505 in0.505 in12.8 mm
Drawing
W16×40 specifications
| dDepth | 16 in406.4 mm |
|---|---|
| bfFlange width | 7 in177.8 mm |
| twWeb thickness | 0.305 in7.7 mm |
| tfFlange thickness | 0.505 in12.8 mm |
| kDesign value | 0.907 in23.0 mm |
| kDetailing value | 1 3/16 in30.2 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 40 lb/ft59.5 kg/m |
| AArea | 11.8 in²7,613 mm² |
| IxMoment of inertia, strong axis | 518 in⁴21,560.8 cm⁴ |
| ZxPlastic modulus, strong axis | 73 in³1,196.3 cm³ |
| SxSection modulus, strong axis | 64.7 in³1,060.2 cm³ |
| rxRadius of gyration, strong axis | 6.63 in168.4 mm |
| IyMoment of inertia, weak axis | 28.9 in⁴1,202.9 cm⁴ |
| ZyPlastic modulus, weak axis | 12.7 in³208.1 cm³ |
| SySection modulus, weak axis | 8.25 in³135.2 cm³ |
| ryRadius of gyration, weak axis | 1.57 in39.9 mm |
| JTorsional constant | 0.794 in⁴33.05 cm⁴ |
| bf/2tfFlange slenderness | 6.93 |
| h/twWeb slenderness | 46.5 |
| Metric designation | W410×60 |
Also known as
W410×60
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.