W12×35 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×35 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.5 in (317.5 mm) deep with a 6.56 in (166.6 mm) flange, a 0.3 in (7.6 mm) web and a 0.52 in (13.2 mm) flange, and weighs 35 lb/ft (52.1 kg/m). Area 10.3 in² (6,645 mm²); strong-axis Ix = 285 in⁴ (11,862.6 cm⁴), Sx = 45.6 in³ (747.3 cm³), Zx = 51.2 in³ (839 cm³).

dDepth
317.5 mm12.5 in12.5 in317.5 mm
bfFlange width
166.6 mm6.56 in6.56 in166.6 mm
twWeb thickness
7.6 mm0.3 in0.3 in7.6 mm
tfFlange thickness
13.2 mm0.52 in0.52 in13.2 mm

Drawing

166.6 mm6.56 in317.5 mm12.5 intf 13.2 mmtf 0.52 intw 7.6 mmtw 0.3 ink 20.8 mmk 0.82 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×35 specifications

dDepth12.5 in317.5 mm
bfFlange width6.56 in166.6 mm
twWeb thickness0.3 in7.6 mm
tfFlange thickness0.52 in13.2 mm
kDesign value0.82 in20.8 mm
kDetailing value1 3/16 in30.2 mm
k1Detailing value3/4 in19.0 mm
WWeight35 lb/ft52.1 kg/m
AArea10.3 in²6,645 mm²
IxMoment of inertia, strong axis285 in⁴11,862.6 cm⁴
ZxPlastic modulus, strong axis51.2 in³839 cm³
SxSection modulus, strong axis45.6 in³747.3 cm³
rxRadius of gyration, strong axis5.25 in133.4 mm
IyMoment of inertia, weak axis24.5 in⁴1,019.8 cm⁴
ZyPlastic modulus, weak axis11.5 in³188.5 cm³
SySection modulus, weak axis7.47 in³122.4 cm³
ryRadius of gyration, weak axis1.54 in39.1 mm
JTorsional constant0.741 in⁴30.84 cm⁴
bf/2tfFlange slenderness6.31
h/twWeb slenderness36.2
Metric designationW310×52

Also known as

W310×52

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.