W18×46 Beam Dimensions & Properties
W Shapes (AISC) · W18: 18 in nominal depth
W18×46 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.1 in (459.7 mm) deep with a 6.06 in (153.9 mm) flange, a 0.36 in (9.1 mm) web and a 0.605 in (15.4 mm) flange, and weighs 46 lb/ft (68.5 kg/m). Area 13.5 in² (8,710 mm²); strong-axis Ix = 712 in⁴ (29,635.7 cm⁴), Sx = 78.8 in³ (1,291.3 cm³), Zx = 90.7 in³ (1,486.3 cm³).
- dDepth
- 459.7 mm18.1 in18.1 in459.7 mm
- bfFlange width
- 153.9 mm6.06 in6.06 in153.9 mm
- twWeb thickness
- 9.1 mm0.36 in0.36 in9.1 mm
- tfFlange thickness
- 15.4 mm0.605 in0.605 in15.4 mm
Drawing
W18×46 specifications
| dDepth | 18.1 in459.7 mm |
|---|---|
| bfFlange width | 6.06 in153.9 mm |
| twWeb thickness | 0.36 in9.1 mm |
| tfFlange thickness | 0.605 in15.4 mm |
| kDesign value | 1.01 in25.7 mm |
| kDetailing value | 1 1/4 in31.8 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 46 lb/ft68.5 kg/m |
| AArea | 13.5 in²8,710 mm² |
| IxMoment of inertia, strong axis | 712 in⁴29,635.7 cm⁴ |
| ZxPlastic modulus, strong axis | 90.7 in³1,486.3 cm³ |
| SxSection modulus, strong axis | 78.8 in³1,291.3 cm³ |
| rxRadius of gyration, strong axis | 7.25 in184.1 mm |
| IyMoment of inertia, weak axis | 22.5 in⁴936.5 cm⁴ |
| ZyPlastic modulus, weak axis | 11.7 in³191.7 cm³ |
| SySection modulus, weak axis | 7.43 in³121.8 cm³ |
| ryRadius of gyration, weak axis | 1.29 in32.8 mm |
| JTorsional constant | 1.22 in⁴50.78 cm⁴ |
| bf/2tfFlange slenderness | 5.01 |
| h/twWeb slenderness | 44.6 |
| Metric designation | W460×68 |
Also known as
W460×68
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.