W16×45 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×45 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.1 in (408.9 mm) deep with a 7.04 in (178.8 mm) flange, a 0.345 in (8.8 mm) web and a 0.565 in (14.4 mm) flange, and weighs 45 lb/ft (67.0 kg/m). Area 13.3 in² (8,581 mm²); strong-axis Ix = 586 in⁴ (24,391.2 cm⁴), Sx = 72.7 in³ (1,191.3 cm³), Zx = 82.3 in³ (1,348.7 cm³).

dDepth
408.9 mm16.1 in16.1 in408.9 mm
bfFlange width
178.8 mm7.04 in7.04 in178.8 mm
twWeb thickness
8.8 mm0.345 in0.345 in8.8 mm
tfFlange thickness
14.4 mm0.565 in0.565 in14.4 mm

Drawing

178.8 mm7.04 in408.9 mm16.1 intf 14.4 mmtf 0.565 intw 8.8 mmtw 0.345 ink 24.6 mmk 0.967 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×45 specifications

dDepth16.1 in408.9 mm
bfFlange width7.04 in178.8 mm
twWeb thickness0.345 in8.8 mm
tfFlange thickness0.565 in14.4 mm
kDesign value0.967 in24.6 mm
kDetailing value1 1/4 in31.8 mm
k1Detailing value13/16 in20.6 mm
WWeight45 lb/ft67.0 kg/m
AArea13.3 in²8,581 mm²
IxMoment of inertia, strong axis586 in⁴24,391.2 cm⁴
ZxPlastic modulus, strong axis82.3 in³1,348.7 cm³
SxSection modulus, strong axis72.7 in³1,191.3 cm³
rxRadius of gyration, strong axis6.65 in168.9 mm
IyMoment of inertia, weak axis32.8 in⁴1,365.2 cm⁴
ZyPlastic modulus, weak axis14.5 in³237.6 cm³
SySection modulus, weak axis9.34 in³153.1 cm³
ryRadius of gyration, weak axis1.57 in39.9 mm
JTorsional constant1.11 in⁴46.2 cm⁴
bf/2tfFlange slenderness6.23
h/twWeb slenderness41.1
Metric designationW410×67

Also known as

W410×67

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.