W10×45 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×45 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.1 in (256.5 mm) deep with a 8.02 in (203.7 mm) flange, a 0.35 in (8.9 mm) web and a 0.62 in (15.7 mm) flange, and weighs 45 lb/ft (67.0 kg/m). Area 13.3 in² (8,581 mm²); strong-axis Ix = 248 in⁴ (10,322.5 cm⁴), Sx = 49.1 in³ (804.6 cm³), Zx = 54.9 in³ (899.6 cm³).
- dDepth
- 256.5 mm10.1 in10.1 in256.5 mm
- bfFlange width
- 203.7 mm8.02 in8.02 in203.7 mm
- twWeb thickness
- 8.9 mm0.35 in0.35 in8.9 mm
- tfFlange thickness
- 15.7 mm0.62 in0.62 in15.7 mm
Drawing
W10×45 specifications
| dDepth | 10.1 in256.5 mm |
|---|---|
| bfFlange width | 8.02 in203.7 mm |
| twWeb thickness | 0.35 in8.9 mm |
| tfFlange thickness | 0.62 in15.7 mm |
| kDesign value | 1.12 in28.4 mm |
| kDetailing value | 1 5/16 in33.3 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 45 lb/ft67.0 kg/m |
| AArea | 13.3 in²8,581 mm² |
| IxMoment of inertia, strong axis | 248 in⁴10,322.5 cm⁴ |
| ZxPlastic modulus, strong axis | 54.9 in³899.6 cm³ |
| SxSection modulus, strong axis | 49.1 in³804.6 cm³ |
| rxRadius of gyration, strong axis | 4.32 in109.7 mm |
| IyMoment of inertia, weak axis | 53.4 in⁴2,222.7 cm⁴ |
| ZyPlastic modulus, weak axis | 20.3 in³332.7 cm³ |
| SySection modulus, weak axis | 13.3 in³217.9 cm³ |
| ryRadius of gyration, weak axis | 2.01 in51.1 mm |
| JTorsional constant | 1.51 in⁴62.85 cm⁴ |
| bf/2tfFlange slenderness | 6.47 |
| h/twWeb slenderness | 22.5 |
| Metric designation | W250×67 |
Also known as
W250×67
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.