W18×40 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×40 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 17.9 in (454.7 mm) deep with a 6.02 in (152.9 mm) flange, a 0.315 in (8.0 mm) web and a 0.525 in (13.3 mm) flange, and weighs 40 lb/ft (59.5 kg/m). Area 11.8 in² (7,613 mm²); strong-axis Ix = 612 in⁴ (25,473.4 cm⁴), Sx = 68.4 in³ (1,120.9 cm³), Zx = 78.4 in³ (1,284.7 cm³).

dDepth
454.7 mm17.9 in17.9 in454.7 mm
bfFlange width
152.9 mm6.02 in6.02 in152.9 mm
twWeb thickness
8.0 mm0.315 in0.315 in8.0 mm
tfFlange thickness
13.3 mm0.525 in0.525 in13.3 mm

Drawing

152.9 mm6.02 in454.7 mm17.9 intf 13.3 mmtf 0.525 intw 8.0 mmtw 0.315 ink 23.5 mmk 0.927 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×40 specifications

dDepth17.9 in454.7 mm
bfFlange width6.02 in152.9 mm
twWeb thickness0.315 in8.0 mm
tfFlange thickness0.525 in13.3 mm
kDesign value0.927 in23.5 mm
kDetailing value1 3/16 in30.2 mm
k1Detailing value13/16 in20.6 mm
WWeight40 lb/ft59.5 kg/m
AArea11.8 in²7,613 mm²
IxMoment of inertia, strong axis612 in⁴25,473.4 cm⁴
ZxPlastic modulus, strong axis78.4 in³1,284.7 cm³
SxSection modulus, strong axis68.4 in³1,120.9 cm³
rxRadius of gyration, strong axis7.21 in183.1 mm
IyMoment of inertia, weak axis19.1 in⁴795 cm⁴
ZyPlastic modulus, weak axis10 in³163.9 cm³
SySection modulus, weak axis6.35 in³104.1 cm³
ryRadius of gyration, weak axis1.27 in32.3 mm
JTorsional constant0.81 in⁴33.71 cm⁴
bf/2tfFlange slenderness5.73
h/twWeb slenderness50.9
Metric designationW460×60

Also known as

W460×60

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.