W21×201 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×201 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 23 in (584.2 mm) deep with a 12.6 in (320.0 mm) flange, a 0.91 in (23.1 mm) web and a 1.63 in (41.4 mm) flange, and weighs 201 lb/ft (299.1 kg/m). Area 59.3 in² (38,258 mm²); strong-axis Ix = 5,310 in⁴ (221,018.9 cm⁴), Sx = 461 in³ (7,554.4 cm³), Zx = 530 in³ (8,685.1 cm³).
- dDepth
- 584.2 mm23 in23 in584.2 mm
- bfFlange width
- 320.0 mm12.6 in12.6 in320.0 mm
- twWeb thickness
- 23.1 mm0.91 in0.91 in23.1 mm
- tfFlange thickness
- 41.4 mm1.63 in1.63 in41.4 mm
Drawing
W21×201 specifications
| dDepth | 23 in584.2 mm |
|---|---|
| bfFlange width | 12.6 in320.0 mm |
| twWeb thickness | 0.91 in23.1 mm |
| tfFlange thickness | 1.63 in41.4 mm |
| kDesign value | 2.13 in54.1 mm |
| kDetailing value | 2 7/8 in73.0 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 201 lb/ft299.1 kg/m |
| AArea | 59.3 in²38,258 mm² |
| IxMoment of inertia, strong axis | 5,310 in⁴221,018.9 cm⁴ |
| ZxPlastic modulus, strong axis | 530 in³8,685.1 cm³ |
| SxSection modulus, strong axis | 461 in³7,554.4 cm³ |
| rxRadius of gyration, strong axis | 9.47 in240.5 mm |
| IyMoment of inertia, weak axis | 542 in⁴22,559.7 cm⁴ |
| ZyPlastic modulus, weak axis | 133 in³2,179.5 cm³ |
| SySection modulus, weak axis | 86.1 in³1,410.9 cm³ |
| ryRadius of gyration, weak axis | 3.02 in76.7 mm |
| JTorsional constant | 40.9 in⁴1,702.39 cm⁴ |
| bf/2tfFlange slenderness | 3.86 |
| h/twWeb slenderness | 20.6 |
| Metric designation | W530×300 |
Also known as
W530×300
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.