W14×193 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×193 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 15.5 in (393.7 mm) deep with a 15.7 in (398.8 mm) flange, a 0.89 in (22.6 mm) web and a 1.44 in (36.6 mm) flange, and weighs 193 lb/ft (287.2 kg/m). Area 56.8 in² (36,645 mm²); strong-axis Ix = 2,400 in⁴ (99,895.5 cm⁴), Sx = 310 in³ (5,080 cm³), Zx = 355 in³ (5,817.4 cm³).

dDepth
393.7 mm15.5 in15.5 in393.7 mm
bfFlange width
398.8 mm15.7 in15.7 in398.8 mm
twWeb thickness
22.6 mm0.89 in0.89 in22.6 mm
tfFlange thickness
36.6 mm1.44 in1.44 in36.6 mm

Drawing

398.8 mm15.7 in393.7 mm15.5 intf 36.6 mmtf 1.44 intw 22.6 mmtw 0.89 ink 51.8 mmk 2.04 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×193 specifications

dDepth15.5 in393.7 mm
bfFlange width15.7 in398.8 mm
twWeb thickness0.89 in22.6 mm
tfFlange thickness1.44 in36.6 mm
kDesign value2.04 in51.8 mm
kDetailing value2 3/4 in69.9 mm
k1Detailing value1 11/16 in42.9 mm
WWeight193 lb/ft287.2 kg/m
AArea56.8 in²36,645 mm²
IxMoment of inertia, strong axis2,400 in⁴99,895.5 cm⁴
ZxPlastic modulus, strong axis355 in³5,817.4 cm³
SxSection modulus, strong axis310 in³5,080 cm³
rxRadius of gyration, strong axis6.5 in165.1 mm
IyMoment of inertia, weak axis931 in⁴38,751.1 cm⁴
ZyPlastic modulus, weak axis180 in³2,949.7 cm³
SySection modulus, weak axis119 in³1,950.1 cm³
ryRadius of gyration, weak axis4.05 in102.9 mm
JTorsional constant34.8 in⁴1,448.49 cm⁴
bf/2tfFlange slenderness5.45
h/twWeb slenderness12.8
Metric designationW360×287

Also known as

W360×287

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.