W27×194 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×194 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 28.1 in (713.7 mm) deep with a 14 in (355.6 mm) flange, a 0.75 in (19.0 mm) web and a 1.34 in (34.0 mm) flange, and weighs 194 lb/ft (288.7 kg/m). Area 57.1 in² (36,839 mm²); strong-axis Ix = 7,860 in⁴ (327,157.9 cm⁴), Sx = 559 in³ (9,160.4 cm³), Zx = 631 in³ (10,340.2 cm³).

dDepth
713.7 mm28.1 in28.1 in713.7 mm
bfFlange width
355.6 mm14 in14 in355.6 mm
twWeb thickness
19.0 mm0.75 in0.75 in19.0 mm
tfFlange thickness
34.0 mm1.34 in1.34 in34.0 mm

Drawing

355.6 mm14 in713.7 mm28.1 intf 34.0 mmtf 1.34 intw 19.0 mmtw 0.75 ink 54.1 mmk 2.13 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×194 specifications

dDepth28.1 in713.7 mm
bfFlange width14 in355.6 mm
twWeb thickness0.75 in19.0 mm
tfFlange thickness1.34 in34.0 mm
kDesign value2.13 in54.1 mm
kDetailing value2 9/16 in65.1 mm
k1Detailing value1 9/16 in39.7 mm
WWeight194 lb/ft288.7 kg/m
AArea57.1 in²36,839 mm²
IxMoment of inertia, strong axis7,860 in⁴327,157.9 cm⁴
ZxPlastic modulus, strong axis631 in³10,340.2 cm³
SxSection modulus, strong axis559 in³9,160.4 cm³
rxRadius of gyration, strong axis11.7 in297.2 mm
IyMoment of inertia, weak axis619 in⁴25,764.7 cm⁴
ZyPlastic modulus, weak axis136 in³2,228.6 cm³
SySection modulus, weak axis88.1 in³1,443.7 cm³
ryRadius of gyration, weak axis3.29 in83.6 mm
JTorsional constant27.1 in⁴1,127.99 cm⁴
bf/2tfFlange slenderness5.24
h/twWeb slenderness31.8
Metric designationW690×289

Also known as

W690×289

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.