W24×207 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×207 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 25.7 in (652.8 mm) deep with a 13 in (330.2 mm) flange, a 0.87 in (22.1 mm) web and a 1.57 in (39.9 mm) flange, and weighs 207 lb/ft (308.0 kg/m). Area 60.7 in² (39,161 mm²); strong-axis Ix = 6,820 in⁴ (283,869.8 cm⁴), Sx = 531 in³ (8,701.5 cm³), Zx = 606 in³ (9,930.6 cm³).

dDepth
652.8 mm25.7 in25.7 in652.8 mm
bfFlange width
330.2 mm13 in13 in330.2 mm
twWeb thickness
22.1 mm0.87 in0.87 in22.1 mm
tfFlange thickness
39.9 mm1.57 in1.57 in39.9 mm

Drawing

330.2 mm13 in652.8 mm25.7 intf 39.9 mmtf 1.57 intw 22.1 mmtw 0.87 ink 52.6 mmk 2.07 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×207 specifications

dDepth25.7 in652.8 mm
bfFlange width13 in330.2 mm
twWeb thickness0.87 in22.1 mm
tfFlange thickness1.57 in39.9 mm
kDesign value2.07 in52.6 mm
kDetailing value2 7/8 in73.0 mm
k1Detailing value1 5/8 in41.3 mm
WWeight207 lb/ft308.0 kg/m
AArea60.7 in²39,161 mm²
IxMoment of inertia, strong axis6,820 in⁴283,869.8 cm⁴
ZxPlastic modulus, strong axis606 in³9,930.6 cm³
SxSection modulus, strong axis531 in³8,701.5 cm³
rxRadius of gyration, strong axis10.6 in269.2 mm
IyMoment of inertia, weak axis578 in⁴24,058.2 cm⁴
ZyPlastic modulus, weak axis137 in³2,245 cm³
SySection modulus, weak axis88.8 in³1,455.2 cm³
ryRadius of gyration, weak axis3.08 in78.2 mm
JTorsional constant38.3 in⁴1,594.17 cm⁴
bf/2tfFlange slenderness4.14
h/twWeb slenderness24.8
Metric designationW610×307

Also known as

W610×307

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.