W21×182 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×182 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 22.7 in (576.6 mm) deep with a 12.5 in (317.5 mm) flange, a 0.83 in (21.1 mm) web and a 1.48 in (37.6 mm) flange, and weighs 182 lb/ft (270.8 kg/m). Area 53.6 in² (34,581 mm²); strong-axis Ix = 4,730 in⁴ (196,877.5 cm⁴), Sx = 417 in³ (6,833.4 cm³), Zx = 476 in³ (7,800.2 cm³).

dDepth
576.6 mm22.7 in22.7 in576.6 mm
bfFlange width
317.5 mm12.5 in12.5 in317.5 mm
twWeb thickness
21.1 mm0.83 in0.83 in21.1 mm
tfFlange thickness
37.6 mm1.48 in1.48 in37.6 mm

Drawing

317.5 mm12.5 in576.6 mm22.7 intf 37.6 mmtf 1.48 intw 21.1 mmtw 0.83 ink 50.3 mmk 1.98 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×182 specifications

dDepth22.7 in576.6 mm
bfFlange width12.5 in317.5 mm
twWeb thickness0.83 in21.1 mm
tfFlange thickness1.48 in37.6 mm
kDesign value1.98 in50.3 mm
kDetailing value2 3/4 in69.9 mm
k1Detailing value1 5/8 in41.3 mm
WWeight182 lb/ft270.8 kg/m
AArea53.6 in²34,581 mm²
IxMoment of inertia, strong axis4,730 in⁴196,877.5 cm⁴
ZxPlastic modulus, strong axis476 in³7,800.2 cm³
SxSection modulus, strong axis417 in³6,833.4 cm³
rxRadius of gyration, strong axis9.4 in238.8 mm
IyMoment of inertia, weak axis483 in⁴20,104 cm⁴
ZyPlastic modulus, weak axis119 in³1,950.1 cm³
SySection modulus, weak axis77.2 in³1,265.1 cm³
ryRadius of gyration, weak axis3 in76.2 mm
JTorsional constant30.7 in⁴1,277.83 cm⁴
bf/2tfFlange slenderness4.22
h/twWeb slenderness22.6
Metric designationW530×272

Also known as

W530×272

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.