W21×50 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×50 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 20.8 in (528.3 mm) deep with a 6.53 in (165.9 mm) flange, a 0.38 in (9.7 mm) web and a 0.535 in (13.6 mm) flange, and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); strong-axis Ix = 984 in⁴ (40,957.2 cm⁴), Sx = 94.5 in³ (1,548.6 cm³), Zx = 110 in³ (1,802.6 cm³).

dDepth
528.3 mm20.8 in20.8 in528.3 mm
bfFlange width
165.9 mm6.53 in6.53 in165.9 mm
twWeb thickness
9.7 mm0.38 in0.38 in9.7 mm
tfFlange thickness
13.6 mm0.535 in0.535 in13.6 mm

Drawing

165.9 mm6.53 in528.3 mm20.8 intf 13.6 mmtf 0.535 intw 9.7 mmtw 0.38 ink 26.4 mmk 1.04 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×50 specifications

dDepth20.8 in528.3 mm
bfFlange width6.53 in165.9 mm
twWeb thickness0.38 in9.7 mm
tfFlange thickness0.535 in13.6 mm
kDesign value1.04 in26.4 mm
kDetailing value1 1/4 in31.8 mm
k1Detailing value13/16 in20.6 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
IxMoment of inertia, strong axis984 in⁴40,957.2 cm⁴
ZxPlastic modulus, strong axis110 in³1,802.6 cm³
SxSection modulus, strong axis94.5 in³1,548.6 cm³
rxRadius of gyration, strong axis8.18 in207.8 mm
IyMoment of inertia, weak axis24.9 in⁴1,036.4 cm⁴
ZyPlastic modulus, weak axis12.2 in³199.9 cm³
SySection modulus, weak axis7.64 in³125.2 cm³
ryRadius of gyration, weak axis1.3 in33.0 mm
JTorsional constant1.14 in⁴47.45 cm⁴
bf/2tfFlange slenderness6.1
h/twWeb slenderness49.4
Metric designationW530×74

Also known as

W530×74

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.