W21×68 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×68 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.1 in (535.9 mm) deep with a 8.27 in (210.1 mm) flange, a 0.43 in (10.9 mm) web and a 0.685 in (17.4 mm) flange, and weighs 68 lb/ft (101.2 kg/m). Area 20 in² (12,903 mm²); strong-axis Ix = 1,480 in⁴ (61,602.3 cm⁴), Sx = 140 in³ (2,294.2 cm³), Zx = 160 in³ (2,621.9 cm³).

dDepth
535.9 mm21.1 in21.1 in535.9 mm
bfFlange width
210.1 mm8.27 in8.27 in210.1 mm
twWeb thickness
10.9 mm0.43 in0.43 in10.9 mm
tfFlange thickness
17.4 mm0.685 in0.685 in17.4 mm

Drawing

210.1 mm8.27 in535.9 mm21.1 intf 17.4 mmtf 0.685 intw 10.9 mmtw 0.43 ink 30.2 mmk 1.19 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×68 specifications

dDepth21.1 in535.9 mm
bfFlange width8.27 in210.1 mm
twWeb thickness0.43 in10.9 mm
tfFlange thickness0.685 in17.4 mm
kDesign value1.19 in30.2 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value7/8 in22.2 mm
WWeight68 lb/ft101.2 kg/m
AArea20 in²12,903 mm²
IxMoment of inertia, strong axis1,480 in⁴61,602.3 cm⁴
ZxPlastic modulus, strong axis160 in³2,621.9 cm³
SxSection modulus, strong axis140 in³2,294.2 cm³
rxRadius of gyration, strong axis8.6 in218.4 mm
IyMoment of inertia, weak axis64.7 in⁴2,693 cm⁴
ZyPlastic modulus, weak axis24.4 in³399.8 cm³
SySection modulus, weak axis15.7 in³257.3 cm³
ryRadius of gyration, weak axis1.8 in45.7 mm
JTorsional constant2.45 in⁴101.98 cm⁴
bf/2tfFlange slenderness6.04
h/twWeb slenderness43.6
Metric designationW530×101

Also known as

W530×101

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.