W21×83 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×83 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.4 in (543.6 mm) deep with a 8.36 in (212.3 mm) flange, a 0.515 in (13.1 mm) web and a 0.835 in (21.2 mm) flange, and weighs 83 lb/ft (123.5 kg/m). Area 24.4 in² (15,742 mm²); strong-axis Ix = 1,830 in⁴ (76,170.4 cm⁴), Sx = 171 in³ (2,802.2 cm³), Zx = 196 in³ (3,211.9 cm³).

dDepth
543.6 mm21.4 in21.4 in543.6 mm
bfFlange width
212.3 mm8.36 in8.36 in212.3 mm
twWeb thickness
13.1 mm0.515 in0.515 in13.1 mm
tfFlange thickness
21.2 mm0.835 in0.835 in21.2 mm

Drawing

212.3 mm8.36 in543.6 mm21.4 intf 21.2 mmtf 0.835 intw 13.1 mmtw 0.515 ink 34.0 mmk 1.34 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×83 specifications

dDepth21.4 in543.6 mm
bfFlange width8.36 in212.3 mm
twWeb thickness0.515 in13.1 mm
tfFlange thickness0.835 in21.2 mm
kDesign value1.34 in34.0 mm
kDetailing value1 1/2 in38.1 mm
k1Detailing value7/8 in22.2 mm
WWeight83 lb/ft123.5 kg/m
AArea24.4 in²15,742 mm²
IxMoment of inertia, strong axis1,830 in⁴76,170.4 cm⁴
ZxPlastic modulus, strong axis196 in³3,211.9 cm³
SxSection modulus, strong axis171 in³2,802.2 cm³
rxRadius of gyration, strong axis8.67 in220.2 mm
IyMoment of inertia, weak axis81.4 in⁴3,388.1 cm⁴
ZyPlastic modulus, weak axis30.5 in³499.8 cm³
SySection modulus, weak axis19.5 in³319.5 cm³
ryRadius of gyration, weak axis1.83 in46.5 mm
JTorsional constant4.34 in⁴180.64 cm⁴
bf/2tfFlange slenderness5
h/twWeb slenderness36.4
Metric designationW530×123

Also known as

W530×123

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.