W30×124 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×124 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.2 in (767.1 mm) deep with a 10.5 in (266.7 mm) flange, a 0.585 in (14.9 mm) web and a 0.93 in (23.6 mm) flange, and weighs 124 lb/ft (184.5 kg/m). Area 36.5 in² (23,548 mm²); strong-axis Ix = 5,360 in⁴ (223,100 cm⁴), Sx = 355 in³ (5,817.4 cm³), Zx = 408 in³ (6,685.9 cm³).

dDepth
767.1 mm30.2 in30.2 in767.1 mm
bfFlange width
266.7 mm10.5 in10.5 in266.7 mm
twWeb thickness
14.9 mm0.585 in0.585 in14.9 mm
tfFlange thickness
23.6 mm0.93 in0.93 in23.6 mm

Drawing

266.7 mm10.5 in767.1 mm30.2 intf 23.6 mmtf 0.93 intw 14.9 mmtw 0.585 ink 40.1 mmk 1.58 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×124 specifications

dDepth30.2 in767.1 mm
bfFlange width10.5 in266.7 mm
twWeb thickness0.585 in14.9 mm
tfFlange thickness0.93 in23.6 mm
kDesign value1.58 in40.1 mm
kDetailing value2 1/4 in57.2 mm
k1Detailing value1 1/2 in38.1 mm
WWeight124 lb/ft184.5 kg/m
AArea36.5 in²23,548 mm²
IxMoment of inertia, strong axis5,360 in⁴223,100 cm⁴
ZxPlastic modulus, strong axis408 in³6,685.9 cm³
SxSection modulus, strong axis355 in³5,817.4 cm³
rxRadius of gyration, strong axis12.1 in307.3 mm
IyMoment of inertia, weak axis181 in⁴7,533.8 cm⁴
ZyPlastic modulus, weak axis54 in³884.9 cm³
SySection modulus, weak axis34.4 in³563.7 cm³
ryRadius of gyration, weak axis2.23 in56.6 mm
JTorsional constant7.99 in⁴332.57 cm⁴
bf/2tfFlange slenderness5.65
h/twWeb slenderness46.2
Metric designationW760×185

Also known as

W760×185

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.