W21×122 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×122 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.7 in (551.2 mm) deep with a 12.4 in (315.0 mm) flange, a 0.6 in (15.2 mm) web and a 0.96 in (24.4 mm) flange, and weighs 122 lb/ft (181.6 kg/m). Area 35.9 in² (23,161 mm²); strong-axis Ix = 2,960 in⁴ (123,204.5 cm⁴), Sx = 273 in³ (4,473.7 cm³), Zx = 307 in³ (5,030.8 cm³).
- dDepth
- 551.2 mm21.7 in21.7 in551.2 mm
- bfFlange width
- 315.0 mm12.4 in12.4 in315.0 mm
- twWeb thickness
- 15.2 mm0.6 in0.6 in15.2 mm
- tfFlange thickness
- 24.4 mm0.96 in0.96 in24.4 mm
Drawing
W21×122 specifications
| dDepth | 21.7 in551.2 mm |
|---|---|
| bfFlange width | 12.4 in315.0 mm |
| twWeb thickness | 0.6 in15.2 mm |
| tfFlange thickness | 0.96 in24.4 mm |
| kDesign value | 1.46 in37.1 mm |
| kDetailing value | 2 1/4 in57.2 mm |
| k1Detailing value | 1 1/2 in38.1 mm |
| WWeight | 122 lb/ft181.6 kg/m |
| AArea | 35.9 in²23,161 mm² |
| IxMoment of inertia, strong axis | 2,960 in⁴123,204.5 cm⁴ |
| ZxPlastic modulus, strong axis | 307 in³5,030.8 cm³ |
| SxSection modulus, strong axis | 273 in³4,473.7 cm³ |
| rxRadius of gyration, strong axis | 9.09 in230.9 mm |
| IyMoment of inertia, weak axis | 305 in⁴12,695.1 cm⁴ |
| ZyPlastic modulus, weak axis | 75.6 in³1,238.9 cm³ |
| SySection modulus, weak axis | 49.2 in³806.2 cm³ |
| ryRadius of gyration, weak axis | 2.92 in74.2 mm |
| JTorsional constant | 8.98 in⁴373.78 cm⁴ |
| bf/2tfFlange slenderness | 6.45 |
| h/twWeb slenderness | 31.3 |
| Metric designation | W530×182 |
Also known as
W530×182
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.