W30×132 Beam Dimensions & Properties
W Shapes (AISC) · W30: 30 in nominal depth
W30×132 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.3 in (769.6 mm) deep with a 10.5 in (266.7 mm) flange, a 0.615 in (15.6 mm) web and a 1 in (25.4 mm) flange, and weighs 132 lb/ft (196.4 kg/m). Area 38.8 in² (25,032 mm²); strong-axis Ix = 5,770 in⁴ (240,165.5 cm⁴), Sx = 380 in³ (6,227.1 cm³), Zx = 437 in³ (7,161.1 cm³).
- dDepth
- 769.6 mm30.3 in30.3 in769.6 mm
- bfFlange width
- 266.7 mm10.5 in10.5 in266.7 mm
- twWeb thickness
- 15.6 mm0.615 in0.615 in15.6 mm
- tfFlange thickness
- 25.4 mm1 in1 in25.4 mm
Drawing
W30×132 specifications
| dDepth | 30.3 in769.6 mm |
|---|---|
| bfFlange width | 10.5 in266.7 mm |
| twWeb thickness | 0.615 in15.6 mm |
| tfFlange thickness | 1 in25.4 mm |
| kDesign value | 1.65 in41.9 mm |
| kDetailing value | 2 1/4 in57.2 mm |
| k1Detailing value | 1 1/2 in38.1 mm |
| WWeight | 132 lb/ft196.4 kg/m |
| AArea | 38.8 in²25,032 mm² |
| IxMoment of inertia, strong axis | 5,770 in⁴240,165.5 cm⁴ |
| ZxPlastic modulus, strong axis | 437 in³7,161.1 cm³ |
| SxSection modulus, strong axis | 380 in³6,227.1 cm³ |
| rxRadius of gyration, strong axis | 12.2 in309.9 mm |
| IyMoment of inertia, weak axis | 196 in⁴8,158.1 cm⁴ |
| ZyPlastic modulus, weak axis | 58.4 in³957 cm³ |
| SySection modulus, weak axis | 37.2 in³609.6 cm³ |
| ryRadius of gyration, weak axis | 2.25 in57.2 mm |
| JTorsional constant | 9.72 in⁴404.58 cm⁴ |
| bf/2tfFlange slenderness | 5.27 |
| h/twWeb slenderness | 43.9 |
| Metric designation | W760×196 |
Also known as
W760×196
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.