W12×120 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×120 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 13.1 in (332.7 mm) deep with a 12.3 in (312.4 mm) flange, a 0.71 in (18.0 mm) web and a 1.11 in (28.2 mm) flange, and weighs 120 lb/ft (178.6 kg/m). Area 35.2 in² (22,710 mm²); strong-axis Ix = 1,070 in⁴ (44,536.8 cm⁴), Sx = 163 in³ (2,671.1 cm³), Zx = 186 in³ (3,048 cm³).

dDepth
332.7 mm13.1 in13.1 in332.7 mm
bfFlange width
312.4 mm12.3 in12.3 in312.4 mm
twWeb thickness
18.0 mm0.71 in0.71 in18.0 mm
tfFlange thickness
28.2 mm1.11 in1.11 in28.2 mm

Drawing

312.4 mm12.3 in332.7 mm13.1 intf 28.2 mmtf 1.11 intw 18.0 mmtw 0.71 ink 43.2 mmk 1.7 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×120 specifications

dDepth13.1 in332.7 mm
bfFlange width12.3 in312.4 mm
twWeb thickness0.71 in18.0 mm
tfFlange thickness1.11 in28.2 mm
kDesign value1.7 in43.2 mm
kDetailing value2 in50.8 mm
k1Detailing value1 3/16 in30.2 mm
WWeight120 lb/ft178.6 kg/m
AArea35.2 in²22,710 mm²
IxMoment of inertia, strong axis1,070 in⁴44,536.8 cm⁴
ZxPlastic modulus, strong axis186 in³3,048 cm³
SxSection modulus, strong axis163 in³2,671.1 cm³
rxRadius of gyration, strong axis5.51 in140.0 mm
IyMoment of inertia, weak axis345 in⁴14,360 cm⁴
ZyPlastic modulus, weak axis85.4 in³1,399.5 cm³
SySection modulus, weak axis56 in³917.7 cm³
ryRadius of gyration, weak axis3.13 in79.5 mm
JTorsional constant12.9 in⁴536.94 cm⁴
bf/2tfFlange slenderness5.57
h/twWeb slenderness13.7
Metric designationW310×179

Also known as

W310×179

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.