W14×120 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×120 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.5 in (368.3 mm) deep with a 14.7 in (373.4 mm) flange, a 0.59 in (15.0 mm) web and a 0.94 in (23.9 mm) flange, and weighs 120 lb/ft (178.6 kg/m). Area 35.3 in² (22,774 mm²); strong-axis Ix = 1,380 in⁴ (57,439.9 cm⁴), Sx = 190 in³ (3,113.5 cm³), Zx = 212 in³ (3,474.1 cm³).

dDepth
368.3 mm14.5 in14.5 in368.3 mm
bfFlange width
373.4 mm14.7 in14.7 in373.4 mm
twWeb thickness
15.0 mm0.59 in0.59 in15.0 mm
tfFlange thickness
23.9 mm0.94 in0.94 in23.9 mm

Drawing

373.4 mm14.7 in368.3 mm14.5 intf 23.9 mmtf 0.94 intw 15.0 mmtw 0.59 ink 39.1 mmk 1.54 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×120 specifications

dDepth14.5 in368.3 mm
bfFlange width14.7 in373.4 mm
twWeb thickness0.59 in15.0 mm
tfFlange thickness0.94 in23.9 mm
kDesign value1.54 in39.1 mm
kDetailing value2 1/4 in57.2 mm
k1Detailing value1 1/2 in38.1 mm
WWeight120 lb/ft178.6 kg/m
AArea35.3 in²22,774 mm²
IxMoment of inertia, strong axis1,380 in⁴57,439.9 cm⁴
ZxPlastic modulus, strong axis212 in³3,474.1 cm³
SxSection modulus, strong axis190 in³3,113.5 cm³
rxRadius of gyration, strong axis6.24 in158.5 mm
IyMoment of inertia, weak axis495 in⁴20,603.5 cm⁴
ZyPlastic modulus, weak axis102 in³1,671.5 cm³
SySection modulus, weak axis67.5 in³1,106.1 cm³
ryRadius of gyration, weak axis3.74 in95.0 mm
JTorsional constant9.37 in⁴390.01 cm⁴
bf/2tfFlange slenderness7.8
h/twWeb slenderness19.3
Metric designationW360×179

Also known as

W360×179

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.