W36×247 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×247 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.7 in (932.2 mm) deep with a 16.5 in (419.1 mm) flange, a 0.8 in (20.3 mm) web and a 1.35 in (34.3 mm) flange, and weighs 247 lb/ft (367.6 kg/m). Area 72.5 in² (46,774 mm²); strong-axis Ix = 16,700 in⁴ (695,106.5 cm⁴), Sx = 913 in³ (14,961.4 cm³), Zx = 1,030 in³ (16,878.7 cm³).

dDepth
932.2 mm36.7 in36.7 in932.2 mm
bfFlange width
419.1 mm16.5 in16.5 in419.1 mm
twWeb thickness
20.3 mm0.8 in0.8 in20.3 mm
tfFlange thickness
34.3 mm1.35 in1.35 in34.3 mm

Drawing

419.1 mm16.5 in932.2 mm36.7 intf 34.3 mmtf 1.35 intw 20.3 mmtw 0.8 ink 58.4 mmk 2.3 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×247 specifications

dDepth36.7 in932.2 mm
bfFlange width16.5 in419.1 mm
twWeb thickness0.8 in20.3 mm
tfFlange thickness1.35 in34.3 mm
kDesign value2.3 in58.4 mm
kDetailing value2 5/8 in66.7 mm
k1Detailing value1 5/8 in41.3 mm
WWeight247 lb/ft367.6 kg/m
AArea72.5 in²46,774 mm²
IxMoment of inertia, strong axis16,700 in⁴695,106.5 cm⁴
ZxPlastic modulus, strong axis1,030 in³16,878.7 cm³
SxSection modulus, strong axis913 in³14,961.4 cm³
rxRadius of gyration, strong axis15.2 in386.1 mm
IyMoment of inertia, weak axis1,010 in⁴42,039.4 cm⁴
ZyPlastic modulus, weak axis190 in³3,113.5 cm³
SySection modulus, weak axis123 in³2,015.6 cm³
ryRadius of gyration, weak axis3.74 in95.0 mm
JTorsional constant34.7 in⁴1,444.32 cm⁴
bf/2tfFlange slenderness6.11
h/twWeb slenderness40.1
Metric designationW920×368

Also known as

W920×368

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.