W12×252 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×252 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 15.4 in (391.2 mm) deep with a 13 in (330.2 mm) flange, a 1.4 in (35.6 mm) web and a 2.25 in (57.2 mm) flange, and weighs 252 lb/ft (375.0 kg/m). Area 74.1 in² (47,806 mm²); strong-axis Ix = 2,720 in⁴ (113,214.9 cm⁴), Sx = 353 in³ (5,784.6 cm³), Zx = 428 in³ (7,013.7 cm³).

dDepth
391.2 mm15.4 in15.4 in391.2 mm
bfFlange width
330.2 mm13 in13 in330.2 mm
twWeb thickness
35.6 mm1.4 in1.4 in35.6 mm
tfFlange thickness
57.2 mm2.25 in2.25 in57.2 mm

Drawing

330.2 mm13 in391.2 mm15.4 intf 57.2 mmtf 2.25 intw 35.6 mmtw 1.4 ink 72.4 mmk 2.85 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×252 specifications

dDepth15.4 in391.2 mm
bfFlange width13 in330.2 mm
twWeb thickness1.4 in35.6 mm
tfFlange thickness2.25 in57.2 mm
kDesign value2.85 in72.4 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 1/2 in38.1 mm
WWeight252 lb/ft375.0 kg/m
AArea74.1 in²47,806 mm²
IxMoment of inertia, strong axis2,720 in⁴113,214.9 cm⁴
ZxPlastic modulus, strong axis428 in³7,013.7 cm³
SxSection modulus, strong axis353 in³5,784.6 cm³
rxRadius of gyration, strong axis6.06 in153.9 mm
IyMoment of inertia, weak axis828 in⁴34,464 cm⁴
ZyPlastic modulus, weak axis196 in³3,211.9 cm³
SySection modulus, weak axis127 in³2,081.2 cm³
ryRadius of gyration, weak axis3.34 in84.8 mm
JTorsional constant108 in⁴4,495.3 cm⁴
bf/2tfFlange slenderness2.89
h/twWeb slenderness7
Metric designationW310×375

Also known as

W310×375

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.