W24×250 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×250 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 26.3 in (668.0 mm) deep with a 13.2 in (335.3 mm) flange, a 1.04 in (26.4 mm) web and a 1.89 in (48.0 mm) flange, and weighs 250 lb/ft (372.0 kg/m). Area 73.5 in² (47,419 mm²); strong-axis Ix = 8,490 in⁴ (353,380.5 cm⁴), Sx = 644 in³ (10,553.3 cm³), Zx = 744 in³ (12,192 cm³).

dDepth
668.0 mm26.3 in26.3 in668.0 mm
bfFlange width
335.3 mm13.2 in13.2 in335.3 mm
twWeb thickness
26.4 mm1.04 in1.04 in26.4 mm
tfFlange thickness
48.0 mm1.89 in1.89 in48.0 mm

Drawing

335.3 mm13.2 in668.0 mm26.3 intf 48.0 mmtf 1.89 intw 26.4 mmtw 1.04 ink 60.7 mmk 2.39 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×250 specifications

dDepth26.3 in668.0 mm
bfFlange width13.2 in335.3 mm
twWeb thickness1.04 in26.4 mm
tfFlange thickness1.89 in48.0 mm
kDesign value2.39 in60.7 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 3/4 in44.4 mm
WWeight250 lb/ft372.0 kg/m
AArea73.5 in²47,419 mm²
IxMoment of inertia, strong axis8,490 in⁴353,380.5 cm⁴
ZxPlastic modulus, strong axis744 in³12,192 cm³
SxSection modulus, strong axis644 in³10,553.3 cm³
rxRadius of gyration, strong axis10.7 in271.8 mm
IyMoment of inertia, weak axis724 in⁴30,135.2 cm⁴
ZyPlastic modulus, weak axis171 in³2,802.2 cm³
SySection modulus, weak axis110 in³1,802.6 cm³
ryRadius of gyration, weak axis3.14 in79.8 mm
JTorsional constant66.6 in⁴2,772.1 cm⁴
bf/2tfFlange slenderness3.49
h/twWeb slenderness20.7
Metric designationW610×372

Also known as

W610×372

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.