W21×248 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×248 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 23.7 in (602.0 mm) deep with a 12.8 in (325.1 mm) flange, a 1.1 in (27.9 mm) web and a 1.99 in (50.5 mm) flange, and weighs 248 lb/ft (369.1 kg/m). Area 73.8 in² (47,613 mm²); strong-axis Ix = 6,830 in⁴ (284,286.1 cm⁴), Sx = 576 in³ (9,438.9 cm³), Zx = 671 in³ (10,995.7 cm³).

dDepth
602.0 mm23.7 in23.7 in602.0 mm
bfFlange width
325.1 mm12.8 in12.8 in325.1 mm
twWeb thickness
27.9 mm1.1 in1.1 in27.9 mm
tfFlange thickness
50.5 mm1.99 in1.99 in50.5 mm

Drawing

325.1 mm12.8 in602.0 mm23.7 intf 50.5 mmtf 1.99 intw 27.9 mmtw 1.1 ink 80.5 mmk 3.17 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×248 specifications

dDepth23.7 in602.0 mm
bfFlange width12.8 in325.1 mm
twWeb thickness1.1 in27.9 mm
tfFlange thickness1.99 in50.5 mm
kDesign value3.17 in80.5 mm
kDetailing value3 1/4 in82.6 mm
k1Detailing value1 3/4 in44.4 mm
WWeight248 lb/ft369.1 kg/m
AArea73.8 in²47,613 mm²
IxMoment of inertia, strong axis6,830 in⁴284,286.1 cm⁴
ZxPlastic modulus, strong axis671 in³10,995.7 cm³
SxSection modulus, strong axis576 in³9,438.9 cm³
rxRadius of gyration, strong axis9.62 in244.3 mm
IyMoment of inertia, weak axis699 in⁴29,094.6 cm⁴
ZyPlastic modulus, weak axis170 in³2,785.8 cm³
SySection modulus, weak axis109 in³1,786.2 cm³
ryRadius of gyration, weak axis3.08 in78.2 mm
JTorsional constant80.7 in⁴3,358.99 cm⁴
bf/2tfFlange slenderness3.22
h/twWeb slenderness15.8
Metric designationW530×369

Also known as

W530×369

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.