W36×256 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×256 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 37.4 in (950.0 mm) deep with a 12.2 in (309.9 mm) flange, a 0.96 in (24.4 mm) web and a 1.73 in (43.9 mm) flange, and weighs 256 lb/ft (381.0 kg/m). Area 75.3 in² (48,581 mm²); strong-axis Ix = 16,800 in⁴ (699,268.8 cm⁴), Sx = 895 in³ (14,666.4 cm³), Zx = 1,040 in³ (17,042.5 cm³).

dDepth
950.0 mm37.4 in37.4 in950.0 mm
bfFlange width
309.9 mm12.2 in12.2 in309.9 mm
twWeb thickness
24.4 mm0.96 in0.96 in24.4 mm
tfFlange thickness
43.9 mm1.73 in1.73 in43.9 mm

Drawing

309.9 mm12.2 in950.0 mm37.4 intf 43.9 mmtf 1.73 intw 24.4 mmtw 0.96 ink 63.0 mmk 2.48 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×256 specifications

dDepth37.4 in950.0 mm
bfFlange width12.2 in309.9 mm
twWeb thickness0.96 in24.4 mm
tfFlange thickness1.73 in43.9 mm
kDesign value2.48 in63.0 mm
kDetailing value2 15/16 in74.6 mm
k1Detailing value1 11/16 in42.9 mm
WWeight256 lb/ft381.0 kg/m
AArea75.3 in²48,581 mm²
IxMoment of inertia, strong axis16,800 in⁴699,268.8 cm⁴
ZxPlastic modulus, strong axis1,040 in³17,042.5 cm³
SxSection modulus, strong axis895 in³14,666.4 cm³
rxRadius of gyration, strong axis14.9 in378.5 mm
IyMoment of inertia, weak axis528 in⁴21,977 cm⁴
ZyPlastic modulus, weak axis137 in³2,245 cm³
SySection modulus, weak axis86.5 in³1,417.5 cm³
ryRadius of gyration, weak axis2.65 in67.3 mm
JTorsional constant52.9 in⁴2,201.86 cm⁴
bf/2tfFlange slenderness3.53
h/twWeb slenderness33.8
Metric designationW920×381

Also known as

W920×381

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.