W5×19 Beam Dimensions & Properties

W Shapes (AISC) · W5: 5 in nominal depth

W5×19 is an AISC wide-flange shape (W5: 5 in nominal depth). It is 5.15 in (130.8 mm) deep with a 5.03 in (127.8 mm) flange, a 0.27 in (6.9 mm) web and a 0.43 in (10.9 mm) flange, and weighs 19 lb/ft (28.3 kg/m). Area 5.56 in² (3,587 mm²); strong-axis Ix = 26.3 in⁴ (1,094.7 cm⁴), Sx = 10.2 in³ (167.1 cm³), Zx = 11.6 in³ (190.1 cm³).

dDepth
130.8 mm5.15 in5.15 in130.8 mm
bfFlange width
127.8 mm5.03 in5.03 in127.8 mm
twWeb thickness
6.9 mm0.27 in0.27 in6.9 mm
tfFlange thickness
10.9 mm0.43 in0.43 in10.9 mm

Drawing

127.8 mm5.03 in130.8 mm5.15 intf 10.9 mmtf 0.43 intw 6.9 mmtw 0.27 ink 18.5 mmk 0.73 in
Drawn to scale · Dimensions in mmDimensions in inches

W5×19 specifications

dDepth5.15 in130.8 mm
bfFlange width5.03 in127.8 mm
twWeb thickness0.27 in6.9 mm
tfFlange thickness0.43 in10.9 mm
kDesign value0.73 in18.5 mm
kDetailing value13/16 in20.6 mm
k1Detailing value7/16 in11.1 mm
WWeight19 lb/ft28.3 kg/m
AArea5.56 in²3,587 mm²
IxMoment of inertia, strong axis26.3 in⁴1,094.7 cm⁴
ZxPlastic modulus, strong axis11.6 in³190.1 cm³
SxSection modulus, strong axis10.2 in³167.1 cm³
rxRadius of gyration, strong axis2.17 in55.1 mm
IyMoment of inertia, weak axis9.13 in⁴380 cm⁴
ZyPlastic modulus, weak axis5.53 in³90.6 cm³
SySection modulus, weak axis3.63 in³59.5 cm³
ryRadius of gyration, weak axis1.28 in32.5 mm
JTorsional constant0.316 in⁴13.15 cm⁴
bf/2tfFlange slenderness5.85
h/twWeb slenderness13.7
Metric designationW130×28.1

Also known as

W130×28.1

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.