W6×20 Beam Dimensions & Properties

W Shapes (AISC) · W6: 6 in nominal depth

W6×20 is an AISC wide-flange shape (W6: 6 in nominal depth). It is 6.2 in (157.5 mm) deep with a 6.02 in (152.9 mm) flange, a 0.26 in (6.6 mm) web and a 0.365 in (9.3 mm) flange, and weighs 20 lb/ft (29.8 kg/m). Area 5.87 in² (3,787 mm²); strong-axis Ix = 41.4 in⁴ (1,723.2 cm⁴), Sx = 13.4 in³ (219.6 cm³), Zx = 14.9 in³ (244.2 cm³).

dDepth
157.5 mm6.2 in6.2 in157.5 mm
bfFlange width
152.9 mm6.02 in6.02 in152.9 mm
twWeb thickness
6.6 mm0.26 in0.26 in6.6 mm
tfFlange thickness
9.3 mm0.365 in0.365 in9.3 mm

Drawing

152.9 mm6.02 in157.5 mm6.2 intf 9.3 mmtf 0.365 intw 6.6 mmtw 0.26 ink 15.6 mmk 0.615 in
Drawn to scale · Dimensions in mmDimensions in inches

W6×20 specifications

dDepth6.2 in157.5 mm
bfFlange width6.02 in152.9 mm
twWeb thickness0.26 in6.6 mm
tfFlange thickness0.365 in9.3 mm
kDesign value0.615 in15.6 mm
kDetailing value7/8 in22.2 mm
k1Detailing value9/16 in14.3 mm
WWeight20 lb/ft29.8 kg/m
AArea5.87 in²3,787 mm²
IxMoment of inertia, strong axis41.4 in⁴1,723.2 cm⁴
ZxPlastic modulus, strong axis14.9 in³244.2 cm³
SxSection modulus, strong axis13.4 in³219.6 cm³
rxRadius of gyration, strong axis2.66 in67.6 mm
IyMoment of inertia, weak axis13.3 in⁴553.6 cm⁴
ZyPlastic modulus, weak axis6.72 in³110.1 cm³
SySection modulus, weak axis4.41 in³72.3 cm³
ryRadius of gyration, weak axis1.5 in38.1 mm
JTorsional constant0.24 in⁴9.99 cm⁴
bf/2tfFlange slenderness8.25
h/twWeb slenderness19.1
Metric designationW150×29.8

Also known as

W150×29.8

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.