W8×58 Beam Dimensions & Properties
W Shapes (AISC) · W8: 8 in nominal depth
W8×58 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.75 in (222.3 mm) deep with a 8.22 in (208.8 mm) flange, a 0.51 in (13.0 mm) web and a 0.81 in (20.6 mm) flange, and weighs 58 lb/ft (86.3 kg/m). Area 17.1 in² (11,032 mm²); strong-axis Ix = 228 in⁴ (9,490.1 cm⁴), Sx = 52 in³ (852.1 cm³), Zx = 59.8 in³ (979.9 cm³).
- dDepth
- 222.3 mm8.75 in8.75 in222.3 mm
- bfFlange width
- 208.8 mm8.22 in8.22 in208.8 mm
- twWeb thickness
- 13.0 mm0.51 in0.51 in13.0 mm
- tfFlange thickness
- 20.6 mm0.81 in0.81 in20.6 mm
Drawing
W8×58 specifications
| dDepth | 8.75 in222.3 mm |
|---|---|
| bfFlange width | 8.22 in208.8 mm |
| twWeb thickness | 0.51 in13.0 mm |
| tfFlange thickness | 0.81 in20.6 mm |
| kDesign value | 1.2 in30.5 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 7/8 in22.2 mm |
| WWeight | 58 lb/ft86.3 kg/m |
| AArea | 17.1 in²11,032 mm² |
| IxMoment of inertia, strong axis | 228 in⁴9,490.1 cm⁴ |
| ZxPlastic modulus, strong axis | 59.8 in³979.9 cm³ |
| SxSection modulus, strong axis | 52 in³852.1 cm³ |
| rxRadius of gyration, strong axis | 3.65 in92.7 mm |
| IyMoment of inertia, weak axis | 75.1 in⁴3,125.9 cm⁴ |
| ZyPlastic modulus, weak axis | 27.9 in³457.2 cm³ |
| SySection modulus, weak axis | 18.3 in³299.9 cm³ |
| ryRadius of gyration, weak axis | 2.1 in53.3 mm |
| JTorsional constant | 3.33 in⁴138.61 cm⁴ |
| bf/2tfFlange slenderness | 5.07 |
| h/twWeb slenderness | 12.4 |
| Metric designation | W200×86 |
Also known as
W200×86
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.