W8×40 Beam Dimensions & Properties
W Shapes (AISC) · W8: 8 in nominal depth
W8×40 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.25 in (209.5 mm) deep with a 8.07 in (205.0 mm) flange, a 0.36 in (9.1 mm) web and a 0.56 in (14.2 mm) flange, and weighs 40 lb/ft (59.5 kg/m). Area 11.7 in² (7,548 mm²); strong-axis Ix = 146 in⁴ (6,077 cm⁴), Sx = 35.5 in³ (581.7 cm³), Zx = 39.8 in³ (652.2 cm³).
- dDepth
- 209.5 mm8.25 in8.25 in209.5 mm
- bfFlange width
- 205.0 mm8.07 in8.07 in205.0 mm
- twWeb thickness
- 9.1 mm0.36 in0.36 in9.1 mm
- tfFlange thickness
- 14.2 mm0.56 in0.56 in14.2 mm
Drawing
W8×40 specifications
| dDepth | 8.25 in209.5 mm |
|---|---|
| bfFlange width | 8.07 in205.0 mm |
| twWeb thickness | 0.36 in9.1 mm |
| tfFlange thickness | 0.56 in14.2 mm |
| kDesign value | 0.954 in24.2 mm |
| kDetailing value | 1 1/4 in31.8 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 40 lb/ft59.5 kg/m |
| AArea | 11.7 in²7,548 mm² |
| IxMoment of inertia, strong axis | 146 in⁴6,077 cm⁴ |
| ZxPlastic modulus, strong axis | 39.8 in³652.2 cm³ |
| SxSection modulus, strong axis | 35.5 in³581.7 cm³ |
| rxRadius of gyration, strong axis | 3.53 in89.7 mm |
| IyMoment of inertia, weak axis | 49.1 in⁴2,043.7 cm⁴ |
| ZyPlastic modulus, weak axis | 18.5 in³303.2 cm³ |
| SySection modulus, weak axis | 12.2 in³199.9 cm³ |
| ryRadius of gyration, weak axis | 2.04 in51.8 mm |
| JTorsional constant | 1.12 in⁴46.62 cm⁴ |
| bf/2tfFlange slenderness | 7.21 |
| h/twWeb slenderness | 17.6 |
| Metric designation | W200×59 |
Also known as
W200×59
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.