Hex Flange Bolt Dimensions (EN 1665, DIN 6921)

A hex flange bolt has a round flange under the hexagon that replaces a washer. In the common heavy series EN 1665 an M8 flange bolt takes a 13 mm wrench and has an 18 mm flange; an M10 takes 16 mm, one size more than the old DIN 6921 M10 (15 mm).

6 sizesChecked 2026-11-154 sources

Size chartTap a size for its drawing and full specs

6 of 6
ThreadPPitchmminsWidth across flatsmmindcFlange diameter (max)mminkHead height incl. flange (max)mminWrench size DIN 6921 (if different)mmin
M50.80.031580.31511.80.4655.40.213—
M610.0394100.39414.20.5596.60.260—
M81.250.0492130.512180.7098.10.319—
M101.50.0591160.63022.30.87810.40.409150.591
M121.750.0689180.70926.61.04711.80.465—
M1620.0787240.945351.37815.40.606—

How to read the chart

s is the wrench or socket size, dc the flange diameter and k the total head height including the flange, all maximum values from EN 1665. Length is measured from under the flange to the tip.

EN 1665 bolts come plain or with a serrated (ratchet) bearing face. The serrations bite into the part and resist loosening, but they damage paint and coatings and should not be used on hardened or very soft surfaces. Designation: EN 1665 – M10 × 30 – 10.9 (plain) or with a serrated-face code from the maker.

The last column lists the old DIN 6921 wrench size where it differs. If a workshop has DIN 6921 M10 bolts (15 mm), a 16 mm socket will not fit them. Check the head before you reach for a socket.

About Flange Bolts

Flange bolts spread the clamp load over a larger area than a plain hex bolt and save a washer in assembly, which is why they dominate in vehicles, machinery frames and sheet-metal assemblies. Property classes are usually 8.8 and 10.9, stainless A2-70.

EN 1665 (heavy series) replaced the German DIN 6921. The flange diameter stayed the same, but from M10 upward the widths across flats and some head heights changed. ISO 4162 and ISO 15071 are related international standards for flange bolts; their head sizes differ in detail, so always order by the standard printed on the drawing.

Thread is ISO metric coarse. Fine-thread flange bolts (M10×1.25, M12×1.5) are common in automotive work and have their own standards, for example EN 14219 for the small series with fine pitch.

Matching nuts

The matching nut is the serrated or plain hex flange nut (flange nuts), with the same wrench size in each standard. Mixing a DIN 6921 bolt with an EN 1661 nut in M10 means two different sockets (15 mm and 16 mm).

Questions

What size socket for an M8 flange bolt?

13 mm for EN 1665 and DIN 6921. M6 takes 10 mm, M10 16 mm (15 mm for DIN 6921), M12 18 mm, M16 24 mm.

What is the flange diameter of an M10 flange bolt?

22.3 mm maximum, in both EN 1665 and DIN 6921.

Do flange bolts need a washer?

Usually not. The flange is the washer. Use a hardened washer only on very soft materials or slotted holes larger than the flange can bridge.

Is DIN 6921 the same as EN 1665?

Not exactly. EN 1665 replaced DIN 6921 with the same flange diameters, but from M10 upward the wrench sizes and some head heights differ.

Sources

  1. EN 1665:1997, Hexagon bolts with flange, heavy series
  2. fasten.it: DIN EN 1665 dimension table
  3. Würth: Hexagonal bolt with flange EN 1665, product data (M10, M12, M16)
  4. Westfield Fasteners: DIN 6921 / EN 1665 flange bolts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.