W10×112 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×112 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 11.4 in (289.6 mm) deep with a 10.4 in (264.2 mm) flange, a 0.755 in (19.2 mm) web and a 1.25 in (31.8 mm) flange, and weighs 112 lb/ft (166.7 kg/m). Area 32.9 in² (21,226 mm²); strong-axis Ix = 716 in⁴ (29,802.2 cm⁴), Sx = 126 in³ (2,064.8 cm³), Zx = 147 in³ (2,408.9 cm³).

dDepth
289.6 mm11.4 in11.4 in289.6 mm
bfFlange width
264.2 mm10.4 in10.4 in264.2 mm
twWeb thickness
19.2 mm0.755 in0.755 in19.2 mm
tfFlange thickness
31.8 mm1.25 in1.25 in31.8 mm

Drawing

264.2 mm10.4 in289.6 mm11.4 intf 31.8 mmtf 1.25 intw 19.2 mmtw 0.755 ink 44.4 mmk 1.75 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×112 specifications

dDepth11.4 in289.6 mm
bfFlange width10.4 in264.2 mm
twWeb thickness0.755 in19.2 mm
tfFlange thickness1.25 in31.8 mm
kDesign value1.75 in44.4 mm
kDetailing value1 15/16 in49.2 mm
k1Detailing value1 in25.4 mm
WWeight112 lb/ft166.7 kg/m
AArea32.9 in²21,226 mm²
IxMoment of inertia, strong axis716 in⁴29,802.2 cm⁴
ZxPlastic modulus, strong axis147 in³2,408.9 cm³
SxSection modulus, strong axis126 in³2,064.8 cm³
rxRadius of gyration, strong axis4.66 in118.4 mm
IyMoment of inertia, weak axis236 in⁴9,823.1 cm⁴
ZyPlastic modulus, weak axis69.2 in³1,134 cm³
SySection modulus, weak axis45.3 in³742.3 cm³
ryRadius of gyration, weak axis2.68 in68.1 mm
JTorsional constant15.1 in⁴628.51 cm⁴
bf/2tfFlange slenderness4.17
h/twWeb slenderness10.4
Metric designationW250×167

Also known as

W250×167

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.