W27×114 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×114 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.3 in (693.4 mm) deep with a 10.1 in (256.5 mm) flange, a 0.57 in (14.5 mm) web and a 0.93 in (23.6 mm) flange, and weighs 114 lb/ft (169.7 kg/m). Area 33.6 in² (21,677 mm²); strong-axis Ix = 4,080 in⁴ (169,822.4 cm⁴), Sx = 299 in³ (4,899.7 cm³), Zx = 343 in³ (5,620.8 cm³).

dDepth
693.4 mm27.3 in27.3 in693.4 mm
bfFlange width
256.5 mm10.1 in10.1 in256.5 mm
twWeb thickness
14.5 mm0.57 in0.57 in14.5 mm
tfFlange thickness
23.6 mm0.93 in0.93 in23.6 mm

Drawing

256.5 mm10.1 in693.4 mm27.3 intf 23.6 mmtf 0.93 intw 14.5 mmtw 0.57 ink 38.9 mmk 1.53 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×114 specifications

dDepth27.3 in693.4 mm
bfFlange width10.1 in256.5 mm
twWeb thickness0.57 in14.5 mm
tfFlange thickness0.93 in23.6 mm
kDesign value1.53 in38.9 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/2 in38.1 mm
WWeight114 lb/ft169.7 kg/m
AArea33.6 in²21,677 mm²
IxMoment of inertia, strong axis4,080 in⁴169,822.4 cm⁴
ZxPlastic modulus, strong axis343 in³5,620.8 cm³
SxSection modulus, strong axis299 in³4,899.7 cm³
rxRadius of gyration, strong axis11 in279.4 mm
IyMoment of inertia, weak axis159 in⁴6,618.1 cm⁴
ZyPlastic modulus, weak axis49.3 in³807.9 cm³
SySection modulus, weak axis31.5 in³516.2 cm³
ryRadius of gyration, weak axis2.18 in55.4 mm
JTorsional constant7.33 in⁴305.1 cm⁴
bf/2tfFlange slenderness5.41
h/twWeb slenderness42.5
Metric designationW690×170

Also known as

W690×170

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.